My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

Not Workin Anymore ...

(2 posts)
  1. User has not uploaded an avatar

    SMILER15

    new member
    Joined: Jan '15
    Posts: 1

    offline

    Hi we have a

    PVR-9300T , after a power cut in the night our box now just shows PVR-9300T in the display and we cant get it to do anything else, what could be the problem,

    We have had this product for a few years without a problem till now. All the best Mike.

    | Sat 3 Jan 2015 9:58:01 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,598

    offline

    SMILER15 - 1 hour ago  » 
    Hi we have a
    PVR-9300T , after a power cut in the night our box now just shows PVR-9300T in the display and we cant get it to do anything else, what could be the problem,

    Hard to be sure based on what you say. I would start by opening the Humax (with the mains power disconnected) and removing the connections to the hard drive. Replace the cover and see if the Humax will boot and function as a set top box. If it will then the most likely problem is that there is a problem with the file system on the hard drive. The easiest fix is to format the drive in a PC.

    | Sat 3 Jan 2015 11:20:04 #2 |

RSS feed for this topic

Reply

You must log in to post.