My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

other satellites

(16 posts)
  1. User has not uploaded an avatar

    macbaz85

    junior member
    Joined: Aug '14
    Posts: 7

    offline

    My purpose is to receive RTL Germany to see F1 when not on the BBC

    RTL Germany on Astra 12188H 27500 ¾ FTA

    Method
    Settings – System Settings – STB Mode – Change to non FreeSat

    (Assume no channels selected)

    Search Channels – User Defined – Enter details as above and save

    Return to Search Channels and press in sequence RGYBGYB

    This opens the hidden menu to enter in my case

    Fixed Dish – Astra1 – DiSEqC A

    Job done

    There are only DiSEqC options on the switch type menu.

    Thank you again for all your valuable help

    | Mon 1 Sep 2014 15:49:14 #11 |
  2. User has not uploaded an avatar

    macbaz85

    junior member
    Joined: Aug '14
    Posts: 7

    offline

    Given the above I was very surprised to receive the following from Humax Support later in the day

    Thank you for contacting Humax Support.

    I apologise, but the tech team say that's not a possibility on the 1000s.

    Best Regards,

    Make of that what you will, Cheers

    | Tue 2 Sep 2014 7:55:57 #12 |
  3. -gonzo-

    -gonzo-

    special member
    Joined: Feb '13
    Posts: 660

    offline

    macbaz85 - 6 minutes ago  » 
    Given the above I was very surprised to receive the following from Humax Support later in the day
    Thank you for contacting Humax Support.
    I apologise, but the tech team say that's not a possibility on the 1000s.
    Best Regards,
    Make of that what you will, Cheers

    I would assume it's because the method posted above isn't achieved via the standard user settings, but via a hidden service menu.
    Also as they're under contract from Freesat they're probably not allowed to discuss certain non-Freesat functions.

    | Tue 2 Sep 2014 8:06:57 #13 |
  4. User has not uploaded an avatar

    Reffub

    special member
    Joined: Jan '13
    Posts: 352

    offline

    I would assume it's because Humax support aren't always the fount of all knowledge.

    | Tue 2 Sep 2014 11:29:40 #14 |
  5. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    macbaz85 - As you are the first, that I have heard of anyway, to venture into DiSEqC on this unit, Is all functioning as expected?

    if you have any questions, I expect that it is much the same as on the Foxsat which has quite a few DiSEqC users.

    I am not surprised that support know little of this area and some others. It does however show the value of forums such as this.

    | Tue 2 Sep 2014 19:14:52 #15 |
  6. User has not uploaded an avatar

    Studon

    member
    Joined: Sep '12
    Posts: 14

    offline

    The easiest way is buy a cheap STB and connect to the 19.2 feed. I did this two years ago !

    Studon

    | Wed 3 Sep 2014 19:25:13 #16 |

RSS feed for this topic

Reply

You must log in to post.