My Humax Forum » Freesat HD » FOXSAT HDR

Programme showing whilst recording

(4 posts)
  1. User has not uploaded an avatar

    Bluefinch

    new member
    Joined: Mar '14
    Posts: 2

    offline

    Each time the Humax has been set to record a programme, the programme will show on the TV whilst recording and take over any programme that we had been watching at the time. It is then impossible to get back to the programme previously being watched.

    Hope this makes sense - would really like to find a solution. Thank you.

    | Tue 11 Mar 2014 12:06:31 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Hi welcome to the forum.

    First thing we need to know is how many coax cables have you connected to the box.

    Look round the back you should have two on the outer connections with nothing connected to the inner connection.

    If you only have one cable it should be connected to tuner 1 in and you should have a short loop cable connecting tuner 1 out to tuner 2 in.

    This will give you two tuner working with some restrictions.

    Can you check and post what you find ?

    | Tue 11 Mar 2014 13:24:40 #2 |
  3. User has not uploaded an avatar

    Bluefinch

    new member
    Joined: Mar '14
    Posts: 2

    offline

    Thank you for your reply. I have two cables on the back - one in the 1in socket and one in the 2in socket. Is this what you mean? Nothing in the out socket.

    | Tue 11 Mar 2014 13:41:00 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    That's what I meant. Next make a note of your recording schedule and then do a reset to factory defaults. Look for the two cables found message during the reset.

    Post if you get one or two cables found.

    | Tue 11 Mar 2014 14:19:22 #4 |

RSS feed for this topic

Reply

You must log in to post.