Well, I’ve shown you how you can upgrade your HDD in the various Humax PVRs, but with the newer ones the filesystem is the Linux FS EXT3, and with bigger than 1TB drives the box can not format them.
So here’s a quick post to show you how I formated my 1.5TB drive with Ubuntu and gparted (to complete my disk upgrading post).
The nice thing about Ubuntu is that it includes the GParted disk utility. It is graphical so easier to use than the CLI.
As you can see from the screengrab above, when I fired up gparted and selected the right HDD from the pulldown (highlighted in the red box), I can see the the HDR T3 started partitioning the drive – the first partition being 1GB in size… (This led me to the suspicion that it might have been able to format the whole drive given enough time. It might have taken it a lot longer than the 25 mins or so for me to doing to this by hand, however.)
So first thing to do is to complete the first partition by formatting it in EXT3 filesystem.
Select the right partition (here /dev/sdb1) and pull down the Partition menu, selecting Format and then ext3. Click on Apply to perform the action. A pop-up will ask you to confirm what you want to do.
Next thing to do is to divide up the second partition into two – remember the original HDD’s configuration? – three partitions: start partition 1Gb, end partition 10Gb, middle partition rest of disk.
Select the second partition, and click on the ‘Partition’ menu option at the top, select ‘New’ from this menu. A pop-up should appear like the screengrab above. First uncheck the ‘Round to cylinders’ option (A). Type ‘10240’ into ‘Free space following’ text box (B). When you tab away from box (B), the value of box (C) should be the remainder of your HDD. Simple! Remember you want to create your filesystem in the EXT3 format, so select that from the pulldown (D). Click on the Add button when finished.
You can now apply the changes to the HDD as you like it to be, or you could ‘format’ the third partition as EXT3. No changes will be made until to click on the ‘Apply’ button at the top, and confirm that you want to make the irreversible actions.
When gparted has finished it will give you a summary of actions made:
If you haven’t formated the 3rd partition to EXT3, do so now. When this is applied it should be fast and you have a HDD ready to put back into your HDR-FOX T2…