My Humax Forum » Freesat HD » FOXSAT HDR

Boot Problem

(4 posts)
  1. User has not uploaded an avatar

    PeeBee

    new member
    Joined: Aug '12
    Posts: 1

    offline

    Hello all (you experts),
    My Foxsat HDR won't boot up. I have tried switching off the 220v for several hours. When I reconnect the front panel starts at "L001", takes several minutes counting up to "L100", then shows "P072" , and finally shows the message "E-FE" and stops there. Any ideas?
    Thanks

    | Mon 6 Aug 2012 10:15:07 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    Welcome to the forum

    Sounds terminal to me, from the error codes in our FAQ - flash memory problem, and the main board will need replacing.

    If within warranty contact retailler or Humax Support.

    | Mon 6 Aug 2012 10:24:36 #2 |
  3. User has not uploaded an avatar

    tuffdisc

    member
    Joined: May '12
    Posts: 15

    offline

    My Foxsat HDR has come up with exactly the same fault, I am well out of warranty. Has a solution been found yet? Is it possible to fix it, or is it a new receiver?

    | Sat 8 Sep 2012 22:06:06 #3 |
  4. User has not uploaded an avatar

    tuffdisc

    member
    Joined: May '12
    Posts: 15

    offline

    Lo and Behold after a 24hr shutdown the unit returned to normal, all seems to be ok, but we will see. If it happens again I will post it up.

    | Tue 11 Sep 2012 9:02:27 #4 |

RSS feed for this topic

Reply

You must log in to post.