I used to be able to easily delete unwanted channels, but since I had to do a factory reset I cannot find this setting. I am also experiencing an odd problem in that one day film four is there, next day it says no signal strength and then it returns. I have the two tuners and when it disappears the signal only appears on one tuner. I have tried to get help from humax but they do not reply. Thanks for any help
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
delete channels
(12 posts)-
| Sat 25 Nov 2017 14:05:24 #1 |
-
Hi welcome to our forum. You have posted in the HB 1000s/11000S thread. As these boxes only have a single tuner it's not surprising
If you have a HDR-xxxxS if you confirm a kindly moderator may move it at a suitable location.
Menu Settings - move right to more and press OK - Choose Editable channels.
| Sat 25 Nov 2017 14:31:31 #2 | -
I am very sorry about this it is in fact a HDR 11000s
| Sat 25 Nov 2017 14:54:32 #3 | -
bebilja - 6 minutes ago »
I am very sorry about this it is in fact a HDR 11000sDon't worry a modulator
willhas moved it The UI on the HB series is in fact identical. Re Film 4 can you tune to the channel when not playing back. Menu - Settings - System Information - Signal Info. Check it says Freesat box connected with 2 cable at the bottom.
Note Film 4 isn't a full time channel. it only starts broadcasting at 11:00 am
Any reception issues you get with Film 4 should also affect these (same transponder).
104 Channel 4
125 More4 + 1
300 Film4
301 Film4 + 1
509 4Music
974 Channel 4| Sat 25 Nov 2017 15:08:45 #4 | -
I have looked in to this and all the channels you said are effected. I looked this morning and on these channels the quality signal is normal but the picture is not good but on bbc 1 the quality is good the whole of the bar is illuminated
| Sun 26 Nov 2017 11:58:04 #7 | -
bebilja - 23 minutes ago »
I have looked in to this and all the channels you said are effected. I looked this morning and on these channels the quality signal is normal but the picture is not good but on bbc 1 the quality is good the whole of the bar is illuminatedWhat does it say about the number of cables at the bottom of the signal information screen ? The signal should be much the same as they are all on UK spot beam transponders.
| Sun 26 Nov 2017 12:23:38 #8 | -
The two tuners are showing the same signal quality
| Sun 26 Nov 2017 12:28:45 #9 |
Reply »
You must log in to post.
