My Humax Forum » Freeview HD » YouView DTR-T

DTR t2000 maintenance mode

(3 posts)
  1. User has not uploaded an avatar

    mashby

    new member
    Joined: Nov '21
    Posts: 2

    offline

    I cant access maintenance mode on my DTR t2000 having tried many times using down arrow on the box AND on the remote. I have 3 boxs and i used to be able to access. All running latest software connected to a talktalk router.

    | Thu 11 Nov 2021 19:05:04 #1 |
  2. User has not uploaded an avatar

    jdlfreetime

    special member
    Joined: Dec '13
    Posts: 320

    offline

    https://support.youview.com/youview-box/box-and-remote/using-maintenance-mode/

    Hi Mashby,

    There is a knack to this when you want to access the maintenance mode. If you don't press sequence in a very quick time, then box will only reboot to normal use. It should be a easy process, but takes getting used to. I have above given you a link directly for full detailed instructions from Youview's very own webpage. I also belong to this forum. Simply select instructions relating to your box model. Hopefully this will help. Please let forum know how you get on. John L

    | Fri 12 Nov 2021 15:09:11 #2 |
  3. User has not uploaded an avatar

    mashby

    new member
    Joined: Nov '21
    Posts: 2

    offline

    Thanks for info & thought i had replied. I did sort t eventually. I was pressing the down button too soon.

    Manage to fit a 2tb hard drive which booted ok after a software reset

    | Sun 14 Nov 2021 18:51:22 #3 |

RSS feed for this topic

Reply

You must log in to post.