My Humax Forum » Freeview HD » FVP 4000T, 5000T

FVP-5000T Missing HD channels

(3 posts)
  1. User has not uploaded an avatar

    SF2

    new member
    Joined: Aug '18
    Posts: 2

    offline

    Since re-tune on 19th July 2018, I am unable to pick up any HD channels on FVP-5000T. All worked fine before. Aerial points to Blubell Hill and has always been local transmitter. Have tried re-tune with no aerial fitted to clear channels. Manual re-tune shows no signal on "frequency" 45, 55 & 56. Aerial has a mast head amp fed directly to Humax then to an old Panasonic TV, which works fine, although I lose signals sometimes for 5 secs every half hour or so and very rarely very small pixel break up.
    http://www.digitaluk.co.uk lists Sudbury as my preferred transmitter but that is Anglia and not local, besides as mentioned TV is ok.

    | Thu 9 Aug 2018 10:58:08 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,682

    offline

    SF2 - 9 minutes ago  » 
    Manual re-tune shows no signal on "frequency" 45, 55 & 56.

    When manual tuning, did you change the "Transmission" type to DVB-T2 for the HD channels?

    | Thu 9 Aug 2018 11:09:07 #2 |
  3. User has not uploaded an avatar

    SF2

    new member
    Joined: Aug '18
    Posts: 2

    offline

    Thanks that sorted it!

    | Sun 12 Aug 2018 18:56:56 #3 |

RSS feed for this topic

Reply

You must log in to post.