My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freeview HD » HDR 1800T, 2000T

1. 

   AlanD
   

   new member
   Joined: Oct '13
   Posts: 1

   offline

   Anyone know how to get aerial loopthrough working on this unit ?
   No standby power option like Fox HDR T2.

   Also front usb port very tight, some sticks wont fit.

   | Fri 1 Nov 2013 11:54:50 #1 |
2. 

   Barry
   

   senior admin
   Joined: Feb '11
   Posts: 11,052

   offline

   Welcome to the Forum

   Only option for loop thru' presently is to leave unit switched on.

   | Fri 1 Nov 2013 12:19:37 #2 |
3. 

   ezra pound
   

   special member
   Joined: Mar '11
   Posts: 173

   offline

   I have seen a post on the AVforums site (HERE), that says Humax are aware of the problem and will add UHF pass through in standby to a later release of firmware, can anyone confirm this?

   | Tue 5 Nov 2013 14:02:56 #3 |
4. 

   Barry
   

   senior admin
   Joined: Feb '11
   Posts: 11,052

   offline

   Can't confirm when it will be fixed, but Humax Towers are certainly aware.

   | Tue 5 Nov 2013 14:06:28 #4 |
5. 

   Tony. M.
   

   new member
   Joined: Nov '13
   Posts: 1

   offline

   I cured the no loop through problem with a Vivanco Ariel splitter, feeding one side direct into the TV and the other into the Humax 2000. It works flawlessly for me with no degradation in signal strength. The splitter was £5.00

   | Tue 12 Nov 2013 12:11:02 #5 |
6. 

   SF54
   

   junior member
   Joined: Dec '13
   Posts: 6

   offline

   News of any update to enable loopthrough much appreciated. Was frankly astonished that this wasn't available out of the box.

   | Sun 29 Dec 2013 17:38:32 #6 |
7. 

   tracysid
   

   member
   Joined: Dec '12
   Posts: 14

   offline

   Would someone be kind enough to explain what loopthrouh is please? Many thanks.

   | Tue 31 Dec 2013 8:51:06 #7 |
8. 

   Barry
   

   senior admin
   Joined: Feb '11
   Posts: 11,052

   offline

   tracysid - 28 minutes ago  » 
   Would someone be kind enough to explain what loopthrouh is please? Many thanks.

   Route the aerial signal in and out of one device to another such as a TV or another recorder.

   | Tue 31 Dec 2013 9:23:58 #8 |
9. 

   tracysid
   

   member
   Joined: Dec '12
   Posts: 14

   offline

   Thank you.

   | Tue 31 Dec 2013 10:57:17 #9 |
10. 

    Martin Liddle
    

    special member
    Joined: Feb '11
    Posts: 4,711

    offline

    Barry - 2 months ago  » 
    Can't confirm when it will be fixed, but Humax Towers are certainly aware.

    Barry

    Someone over on AVForum has quoted a response from Humax that the design intent was never to have aerial loopthrough in standby and it will not be fixed. Can you confirm if this is correct?

    | Sun 26 Jan 2014 15:34:11 #10 |

RSS feed for this topic

Reply »

You must log in to post.