Hi, our HDR2000T sometimes doesnt record the full programme, usually the last 10-15 minutes. Its getting very frustrating! Anybody know the ending to the last three Scott & Bailey police drama? haha
My Humax Forum » Freeview HD » HDR 1800T, 2000T
HDR2000T recording issues
(26 posts)-
| Fri 17 Oct 2014 10:34:39 #1 |
-
Have you got channels numbered over 800 in your channel list ?
| Fri 17 Oct 2014 10:39:02 #2 | -
Yes
| Fri 17 Oct 2014 10:41:07 #3 | -
VicnBob - 4 minutes ago »
YesThat's the cause of the problem. Auto tuning has stored channels from more than 1 transmitter. The channels at 800 plus could well be the ones you should have.
I don't have a HDR2000T but I do have a pair of HDR FOX T2's so guessing the menus will be similar here's the procedure required to manually tune the box.
Firstly identify which transmitter is your preferred one.
Enter your postcode here to find the transmitter, tick the detailed view option. Make a note of the UHF channels in grey (you can ignore the + or -) and which of them are the HD ones.
http://www.dtg.org.uk/work/coverage.html
Next step is to delete all your existing Radio and TV Channels
Menu Settings Edit Channels - (default password is 0000) - Edit Channel list
TV will be displayed by default. Press blue and select all. Press red to delete all the TV channels.
Switch to Radio
Green group button, repeat the procedure to delete all Radio channels
Save the now empty channel list.
The box will ask you to retune, choose the manual option.
Select each of the channel numbers in your list (choose DVB-T for SD and DVB-T2 for HD), scan and save each one in turn.
That should fix the problem as the box will now follow the accurate recording codes transmitted by the broadcasters.
| Fri 17 Oct 2014 10:58:51 #4 | -
Gosh don't you know your stuff! Thank you very much. Will give it a go.
| Fri 17 Oct 2014 11:36:44 #5 | -
On a similar tack... has anyone encountered the issue of failed recordings on the 2000T?
Can't spot any particular pattern but about 1 in 10 scheduled recordings seem to fail (most recently on BBC3 or BBC4 for some reason).
List of recorded items shows program name but states 0mins duration and will not play.Is this something to do with current software (not sure when next update is due?) or perhaps a transmitter issue?
If this is a known issue with this model I suspect nothing will be done unless a sufficient number if people phone to log the complaint....
Will try a factory reset but not too hopeful
Thanks for any advice please??????
| Wed 29 Oct 2014 18:18:32 #6 | -
Einstein40 - 1 minute ago »
On a similar tack... has anyone encountered the issue of failed recordings on the 2000T?
Can't spot any particular pattern but about 1 in 10 scheduled recordings seem to fail (most recently on BBC3 or BBC4 for some reason).
List of recorded items shows program name but states 0mins duration and will not play.Is there a reason given eg Failed to track. If it is failed to track have you tried manual tuning?
| Wed 29 Oct 2014 18:21:31 #7 | -
Einstein40 - 5 minutes ago » (most recently on BBC3 or BBC4 for some reason).
List of recorded items shows program name but states 0mins duration and will not play.
Is this something to do with current software (not sure when next update is due?)This is a known problem that Humax issued a fix for very recently.
To check which firmware you are using its MENU > Settings > System > System information
It must be 1.01.06 or greater| Wed 29 Oct 2014 18:36:54 #8 | -
Einstein40 - 5 minutes ago » (most recently on BBC3 or BBC4 for some reason).
List of recorded items shows program name but states 0mins duration and will not play.
Is this something to do with current software (not sure when next update is due?)This is a different issue to the OP's.
This thread is VicnBob's and therefore rather than highjack for your own issue and diverting attention from VicnBob's issue, starting a new thread would have been better to state your situation without people getting confused between your issue and Bob's different issue!
| Wed 29 Oct 2014 18:38:51 #9 | -
Apologies Luke (and VicnBob) - was searching site for related information and found this thread which was close and instead of starting a thread just jumped straight in. Rude of me and will be less self-centred in future visits.
Many thanks for the info anyway Luke, appreciated. Will check DTG schedules for OTA updates... maybe that should have been my first point of call!?!...and Martin, thanks also for your response. There is no reason given except "recording failed" but if the answer above pans out I will hopefully have a resolution.
| Wed 29 Oct 2014 21:42:23 #10 |
Reply »
You must log in to post.
