Humax HDR 1010S - Capacitors

My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Humax HDR 1010S - Capacitors

(9 posts)

andyfras

senior member
Joined: Nov '15
Posts: 89
offline
I've just been sent an HDR 1010S for repair, which was occasionally missing recordings.

When I checked the capacitors on the mainboard I found that all 3 x 220uF @ 16V were out of specification for ESR, as well as 2 x 10uF @ 50V. All are surface mount.

I have replaced them, and so far all is well.

All the 100uF @ 16V SMD capacitors are still OK, so it suggests that the 220uF are of inferior quality. The through-hole caps are OK too.

I have the same model, so I expect I will be doing a similar repair on mine soon.
Attachments
1. HDR_1010S_-_labelled.jpg (148.2 KB, 188 downloads) 6 years old
| Fri 23 Feb 2018 14:25:36 #1 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

Thanks for this post. So far my first generation HDR-1000S has no issue despite being an early model.

| Fri 23 Feb 2018 21:39:21 #2 |
Faust

special member
Joined: Jun '13
Posts: 1,598
offline

grahamlthompson - 40 minutes ago »
Thanks for this post. So far my first generation HDR-1000S has no issue despite being an early model.

I'm really tempting fate by posting this, but mine too is an early model and has not experienced any issues.

| Fri 23 Feb 2018 22:20:57 #3 |
Barry

senior admin
Joined: Feb '11
Posts: 11,040
offline

HDR 1010S in daily use, very early model - no issues.

| Fri 23 Feb 2018 22:28:58 #4 |
Faust

special member
Joined: Jun '13
Posts: 1,598
offline

Just been working out that my HDR 1000s will be 6 years old later in the year. Not bad service from Humax.

| Sun 25 Feb 2018 14:52:10 #5 |
andyfras

senior member
Joined: Nov '15
Posts: 89
offline

The one I repaired was a 2015 model.

| Mon 26 Feb 2018 9:20:39 #6 |
Faust

special member
Joined: Jun '13
Posts: 1,598
offline

andyfras - 2 hours ago »
The one I repaired was a 2015 model.

I have the perception that the original models have proved to be more robust - touch wood.

| Mon 26 Feb 2018 11:21:45 #7 |
mlc

new member
Joined: Mar '18
Posts: 1
offline

Awesome , well done thanks living in Spain ,sending away for repair was not an option for me , i hope this will help me sort out my intermittent fault great job finding the faulty parts

| Mon 5 Mar 2018 18:31:15 #8 |
andyfras

senior member
Joined: Nov '15
Posts: 89
offline

I've been told that the link to the picture in the message above no longer works. Here is a fresh link.

| Mon 13 Jul 2020 14:03:59 #9 |