My Humax Forum » Freesat HD » FOXSAT HDR

non-freesat recording not seen in web interface

(39 posts)
  1. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    using telnet as per Raydons post

    | Thu 20 May 2021 16:19:00 #21 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    More Info Needs Telnet or Samba to the Box.

    Needs telnet to run the commands, but you will also need FTP or samba to copy the OPK file to the Foxsat-HDR.

    Install Packages from the command line

    --------------------------------------

    Copy the opk file to /opt then run:

    cd /opt

    opkg install fixfilenames_1.0-2_mips.opk

    Also try clearing the browser cache.

    | Thu 20 May 2021 17:35:53 #22 |
  3. User has not uploaded an avatar

    davewi11

    member
    Joined: Feb '19
    Posts: 13

    offline

    I can connect to the Humax address using telnet. The prompt says Foxsat -HDR~# but I don't know what to enter to install the fixfilenames.opk package, if that's possible.

    | Fri 21 May 2021 11:16:24 #23 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    davewi11 - 50 mins ago  » 
    I can connect to the Humax address using telnet. The prompt says Foxsat -HDR~# but I don't know what to enter to install the fixfilenames.opk package, if that's possible.

    Have you got a copy of fixfilenames_1.0-2_mips.opk on your PC and have copied it to the opt folder on the Foxsat using samba or FTP?

    | Fri 21 May 2021 12:08:43 #24 |
  5. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    davewi11 - 1 day ago  » 
    Sorry, hpkg.tv redirects to hummypkg.org.uk which is where I went.

    Check your PM's

    | Fri 21 May 2021 15:23:40 #25 |
  6. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Download the file from the PM Link I posted.

    Copy this to opt using Samba or Filezilla

    Attachments

    1. Copy_To_OPT_using_Filezilla.jpg (295.3 KB, 1 downloads) 3 years old
    2. Copy_to_OPT_using_Samba.jpg (124.9 KB, 1 downloads) 3 years old
    | Fri 21 May 2021 16:41:28 #26 |
  7. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    davewi11 - 5 hours ago  » 
    I can connect to the Humax address using telnet. The prompt says Foxsat -HDR~# but I don't know what to enter to install the fixfilenames.opk package, if that's possible.

    In the telnet window once the file is in opt

    cd /opt enter

    opkg install fixfilenames_1.0-2_mips.opk enter

    Once loaded go to settings and enable the add on

    | Fri 21 May 2021 16:44:06 #27 |
  8. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Remember to reboot the box after the install. The above refers to after you have telnetted into the Box.

    | Fri 21 May 2021 18:50:04 #28 |
  9. User has not uploaded an avatar

    davewi11

    member
    Joined: Feb '19
    Posts: 13

    offline

    I attach the view shown in Windows Explorer - no opt folder. I also attach the view of FileZilla when it failed to connect with the IP address. If telnet is connected, these two windows do not change.

    Attachments

    1. FileZillaFail.jpg (104.3 KB, 10 downloads) 3 years old
    2. ExplorerFail.jpg (51.5 KB, 12 downloads) 3 years old
    | Fri 21 May 2021 20:34:17 #29 |
  10. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Remind me again of which version of Windows you have ?

    | Fri 21 May 2021 20:41:37 #30 |

RSS feed for this topic

Reply »

You must log in to post.