I recently purchased the hdr1100s and connected 1 sat cable. Now I have connected a 2nd cable but can't find anyway to change the setting from 1 to 2, any ideas please
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
Settings on hdr1100s
(6 posts)-
| Thu 26 Nov 2015 23:04:27 #1 |
-
Just do a factory reset. You will need to make a note of your recording schedule (or photograph it with a digital camera), as you wil need to re-enter them. Before you ask it will not affect your existing recordings.
The number of cables is detected during setup, there is a hidden menu to change this but it's easier to do the reset.
Welcome to our forum.
| Thu 26 Nov 2015 23:41:09 #2 | -
Thank you. When I looked at the factory reset, before I came on here it asked me for a pin number, which I didn't have, but since I found there is a default '0000' so I'll try that shortly
| Thu 26 Nov 2015 23:58:17 #3 | -
Bowler76 - 53 seconds ago »
Thank you. When I looked at the factory reset, before I came on here it asked me for a pin number, which I didn't have, but since I found there is a default '0000' so I'll try that shortly0000 is default pin on all Humax boxes since the year dot
| Thu 26 Nov 2015 23:59:58 #4 | -
Thanks First Humax but quite like it.
| Fri 27 Nov 2015 0:04:01 #5 | -
Thank you, up and running now.
| Fri 27 Nov 2015 1:08:30 #6 |
Reply
You must log in to post.
