My Humax Forum » Freeview HD » YouView DTR-T

1010 will not connect in setup

(8 posts)
  1. User has not uploaded an avatar

    mactoshb

    senior member
    Joined: Apr '14
    Posts: 83

    offline

    Humax DTR 1010 not connecting to internet?
    I bought a DTR 1010 that was sold as faulty hard drive and I tested the drive and confirmed it was faulty, so fitted a new drive in it
    I then went in to maintenance mode scrolled to internet recovery, keep recordings and it went on line, downloaded the firm/software and then was restarted and it went straight into the setup routine, but immediately came up with a message saying it cannot connect and on telling it to Auto Connect I get another message saying "We cannot connect to the internet." and it is not possible to proceed further. Any ideas as to how it first connected when asked to update in maintenance mode and downloaded and restarted etc and then cannot go on line during setup and also is there any way of bypassing the part of setup to allow you to continue the setup without connecting.
    Any suggestions will be welcome
    Thanks mactoshb

    | Thu 18 Mar 2021 8:50:40 #1 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Admin: Wrong Forum, please move.

    Admin Edit: Done, thank you.

    | Thu 18 Mar 2021 9:49:34 #2 |
  3. User has not uploaded an avatar

    mactoshb

    senior member
    Joined: Apr '14
    Posts: 83

    offline

    Did not know I was in wrong forum, which should I be in and how do I move?
    Thanks Boyd

    | Fri 19 Mar 2021 8:22:27 #3 |
  4. VFRRider750

    VFRRider750

    junior member
    Joined: Feb '21
    Posts: 7

    offline

    From the Main Menu, under Freeview HD Section, you will see YouView DTR-T, so I guess it goes there, as for moving it, when I made a mistake before I just cut and pasted a new post in the correct section.

    | Fri 19 Mar 2021 8:31:07 #4 |
  5. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,980

    online

    Unfortunately the OP is stuck, if the unit cannot connect you cannot proceed. A ridiculous decision by Youview to implement this.

    | Fri 19 Mar 2021 8:40:19 #5 |
  6. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    A mobile phone setup to create a local WiFI hotspot may allow the box to be setup without a broadband connection.

    | Fri 19 Mar 2021 10:34:40 #6 |
  7. User has not uploaded an avatar

    mactoshb

    senior member
    Joined: Apr '14
    Posts: 83

    offline

    I have moved this post to the correct section by copy/ paste but cannot find how to delete this one, so if admin, or whoever can remove it please feel free
    Thanks, mactoshb

    | Sat 20 Mar 2021 6:15:29 #7 |
  8. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,980

    online

    This thread had already been moved to correct area therefore your copy/paste deleted.

    | Sat 20 Mar 2021 6:41:06 #8 |

RSS feed for this topic

Reply

You must log in to post.