My Humax Forum » Freeview HD » YouView DTR-T

5, 5USA and 5* on TV show as channel not tuned or heavy pixlating when box on s

(5 posts)
  1. jt edson

    jt edson

    new member
    Joined: Dec '12
    Posts: 3

    offline

    5USA, 5 and 5* on my tv come up as channel not tuned or with heavy pixlating when the youview humax box is in standby (orange). When the youview box is on (blue) they work ok on the TV

    | Sat 29 Dec 2012 16:01:14 #1 |
  2. gomezz

    gomezz

    special member
    Joined: Mar '11
    Posts: 943

    offline

    I assume the aerial feed to the TV is daisy-chained through the Youview box? Do you have RF Passthrough turned on (it is on regardless in Low Eco mode despite it showing as off in the settings menu)?

    | Sat 29 Dec 2012 16:26:59 #2 |
  3. jt edson

    jt edson

    new member
    Joined: Dec '12
    Posts: 3

    offline

    Yes aerial fed through box to TV.
    Eco-mode set to High and RF Loop Through set to OFF

    | Sat 29 Dec 2012 16:38:18 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    jt edson - 7 minutes ago  » 
    Yes aerial fed through box to TV.
    Eco-mode set to High and RF Loop Through set to OFF

    Either you need a splitter before the box to give it a seperate feed or you need RF loop through on.

    | Sat 29 Dec 2012 16:46:34 #4 |
  5. jt edson

    jt edson

    new member
    Joined: Dec '12
    Posts: 3

    offline

    RF Loop through now set to ON and have tested this by putting the box on standby and 5, 5USA and 5* now appear to be fine.

    | Sat 29 Dec 2012 16:58:30 #5 |

RSS feed for this topic

Reply

You must log in to post.