My Humax Forum » Freeview HD » HDR 1800T, 2000T

Auto Screen Size 16/9 or 4/3

(4 posts)
  1. johnross1983

    johnross1983

    new member
    Joined: Nov '16
    Posts: 2

    offline

    Does anybody know how to auto change the screen size from 16/9 or 4/3 for new widescreen standard programmes and the older 4/3 programmes that I had recorded to view them full screen, the only was to doi this is change the setting manually if I wanted to watch a recording that is shot in 4/3 mode, to change it to full screen. my tv settings are in 16/9 always, and the freeview player on the tv itself changes automatically to full screen, but the HDR 1800T does not, anybody help please...

    I connect using a HDMI to an LG 47LH3000 TV

    | Tue 29 Nov 2016 15:56:41 #1 |
  2. User has not uploaded an avatar

    bill63

    special member
    Joined: Oct '15
    Posts: 215

    offline

    Hi johnross1983

    In order for it to work properly you must have both the 2000T and the TV set to auto or 16/9 if your TV is wide screen.
    barring in mind that the 16/9 picture will be proper 16/9 and 4x3 picture will be proper 4x3 with the edges cut off.

    I have found its just best to set them both to 16/9 then you get a proper 16/9 and 4x3 picture.

    If you watch a lot of 4x3 content you could temporary select 4.3 zoom on the 2000T, which will zoom the picture to full screen.
    But you will need to change it back to watch proper wide screen (16/9)

    | Tue 29 Nov 2016 21:23:17 #2 |
  3. johnross1983

    johnross1983

    new member
    Joined: Nov '16
    Posts: 2

    offline

    Hi thanks, yes this is what I had been doing but I just wondered why there isn't an 'auto' or 'full screen' setting to do this?

    I thought I was maybe needing to update but I am on the latest firmware (12 Aug 2015) and thought there may have been a more recent update by now...

    | Wed 30 Nov 2016 13:02:17 #3 |
  4. User has not uploaded an avatar

    Faust

    special member
    Joined: Jun '13
    Posts: 1,598

    offline

    johnross1983 - 50 minutes ago  » 
    Hi thanks, yes this is what I had been doing but I just wondered why there isn't an 'auto' or 'full screen' setting to do this?
    I thought I was maybe needing to update but I am on the latest firmware (12 Aug 2015) and thought there may have been a more recent update by now...

    I agree, it is a pain. Our TV does this automatically but not the 2000T. I'm afraid is not a feature rich product. It appears as far as Humax is concerned to be their unloved child.

    | Wed 30 Nov 2016 13:55:07 #4 |

RSS feed for this topic

Reply

You must log in to post.