Hello
I cant seem to get it to boot the new software from the usb stick.
I put on foxsat-hdr_upgrade.hdf to formatted stick. All the foxsat hdr will do is to boot normally even if I keep my finger on the standby button.
Any ideas please.
number77
My Humax Forum » Freesat HD » FOXSAT HDR
Cant get Raydons media and server sw working
(6 posts)-
| Sat 23 Apr 2011 20:21:02 #1 |
-
The loader (whick reads the firmware) is very choosy about the stick - try one < 1gb.
I have a thery that it is something to do with the allocation table size - (the default varies under windows) but I have not tested this well. The file must be in the root folder and named exactly as indicated (including case)see http://www.humaxdigital.com/uk/support/downloadcenter_model_tool.aspx?category_seq=65
| Sun 24 Apr 2011 7:48:48 #2 | -
Mine works fine with a 16GB stick, but strangely after prolonged use and filling it up with other stuff it stops working as a firmware updater until the stick is reformatted.
| Sun 24 Apr 2011 9:41:32 #3 | -
That worked a treat thanks, tried an 8gb stick instead of a 256mb.
thyristor44| Sun 24 Apr 2011 18:52:00 #4 | -
Please can anyone advise on a type and format of stick they have had success with? I have tried a couple but no joy.
thanks| Thu 13 Oct 2011 8:28:58 #5 | -
Mines just done an over the air update and it is HPRSFCI 1.00.17 how do I get the latest one ?
Just found out, sorry, seem to have the latest one OTA.
Thanks| Fri 14 Oct 2011 3:55:01 #6 |
Reply
You must log in to post.
