My Humax Forum » Freeview HD » FVP 4000T, 5000T

CEC issue.

(4 posts)
  1. User has not uploaded an avatar

    Tommy1976

    member
    Joined: Jan '16
    Posts: 32

    offline

    I have a 4000T and a Sony tv, I’ve noticed that when my Humax is off the cec on all my other devices wont work, it only works when the Humax is switched on, Any help would be greatly appreciated, many thanks.

    | Tue 23 Jan 2018 11:27:31 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,711

    offline

    Tommy1976 - 13 minutes ago  » 
    I have a 4000T and a Sony tv, I’ve noticed that when my Humax is off the cec on all my other devices wont work, it only works when the Humax is switched on.

    It might help to get a solution if you tell us what the other devices are and what cables run between the different devices.

    | Tue 23 Jan 2018 11:41:58 #2 |
  3. User has not uploaded an avatar

    Tommy1976

    member
    Joined: Jan '16
    Posts: 32

    offline

    Thanks Martin,other devices are a PlayStation 4 and an Nvidia shield, connected by Hdmi.

    | Tue 23 Jan 2018 11:48:43 #3 |
  4. User has not uploaded an avatar

    mrbiscuit

    new member
    Joined: Oct '14
    Posts: 2

    offline

    Tommy1976 - 4 weeks ago  » 
    I have a 4000T and a Sony tv, I’ve noticed that when my Humax is off the cec on all my other devices wont work, it only works when the Humax is switched on, Any help would be greatly appreciated, many thanks.

    Noticed same problem after the 1.03.39 update. Samsung TV.
    Have inserted a CEC blocking dongle on the 4000T.
    Used to need this with the hdr2000t also.
    Guessing the 4000t is leaving the CEC line in an active or invalid state in standby.
    Oddly the .37 update was not problematic.

    | Thu 22 Feb 2018 8:08:13 #4 |

RSS feed for this topic

Reply

You must log in to post.