My Humax Forum » Freeview HD » FVP 4000T, 5000T

CONNECT

(7 posts)
  1. User has not uploaded an avatar

    Geoffwb

    new member
    Joined: Apr '17
    Posts: 4

    offline

    WHICH CABLES TO USE TO CONNECT TO LOGIC TVL24HED13

    | Wed 12 Apr 2017 18:03:45 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Hi welcome to our forum. Can't find any details of the TV. Can you photograph what sockets the TV has on it ?

    | Wed 12 Apr 2017 18:33:19 #2 |
  3. User has not uploaded an avatar

    Luke

    special member
    Joined: Apr '11
    Posts: 1,499

    offline

    HDMI input x 3,SCART x 1,SVGA x 1,USB 2.0 x 1,Component input x 1,Composite input x 1
    https://www.amazon.co.uk/d/Home-Cinema-TV-Video/LOGIK-L24HED13-Ready-Freeview-Player-HDMI-SCART/B00NYEI4HA

    So if the FVP-4000T has all its accessories:
    Connect the supplied HDMI cable;
    Optionally conect the RF cable if you also want to use the TVs tuner (which with a FVP-4000T there would be little use);

    Connection to your router will depend on whether you want to use the internet features and if you want to use WiFi, ethernet cable, or some other connection between the FVP-4000T and your router. all t

    | Wed 12 Apr 2017 18:50:40 #3 |
  4. User has not uploaded an avatar

    Luke

    special member
    Joined: Apr '11
    Posts: 1,499

    offline

    Geoffwb - 14 hours ago  » 
    CONNECTED 4000T TO TELEVISION LOGIC L24HED13.JUST SAYS "NO SIGNAL" CONNECTED BACK TO OLD FREEVIEW BOX AND THAT WORKS SO THE SIGNAL IS THERE?

    Please would you provide more detail?

    When you connect the FVP-4000T to the TV can you see the FVP-4000Ts menus OK?

    Have you tuned the FVP-4000T and what happened?

    Is the message "NO SIGNAL" coming from the TV? In other words is it the same message that you would get from the TV if you were watching through the TV's tuner and then removed the aerial from the TV?

    | Thu 13 Apr 2017 8:51:05 #4 |
  5. User has not uploaded an avatar

    Geoffwb

    new member
    Joined: Apr '17
    Posts: 4

    offline

    Hi,no,cannot see 4000Ts menus.
    Have not tuned 4000T.
    NO SIGNAL showing on TV screen.
    Remove scart connection at tv end and tv works on its own without freeview box.
    Remove rf connection at tv end and it continues working ok through freeview box.
    Remove roof ariel connection at freeview box and tv shows"NO SIGNAL"

    | Thu 13 Apr 2017 9:31:55 #5 |
  6. User has not uploaded an avatar

    Geoffwb

    new member
    Joined: Apr '17
    Posts: 4

    offline

    As you can see I am connected to the old Freeview box!

    | Thu 13 Apr 2017 10:06:13 #6 |
  7. User has not uploaded an avatar

    Pollensa1946

    special member
    Joined: Sep '12
    Posts: 1,171

    offline

    When you connect the FVP4000 to the TV using the HDMI lead did you use the Source button on the TV R/C to select that HDMI input?

    | Thu 13 Apr 2017 10:27:14 #7 |

RSS feed for this topic

Reply

You must log in to post.