My Humax Forum » Freesat HD » FOXSAT HDR

Custom Firmware channel edit issue

(32 posts)
  1. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    this is what it reports,,

    Attachments

    1. HDR4.jpg (56.2 KB, 4 downloads) 11 years old
    | Sat 20 Apr 2013 13:05:29 #21 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Did #16 restore your custom channels?
    Did you make any other changes re the problem with nowster's patch?

    | Sat 20 Apr 2013 13:23:24 #22 |
  3. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    No #16 did not restore my channels, perhaps I am not doing it correctly. I still have all the channels from overnight.

    | Sat 20 Apr 2013 13:55:20 #23 |
  4. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    I don't recall installing any patches other than the final settop patch. Which I uninstalled yesterday. At least I think I did, I'm not much good with command instructions.

    | Sat 20 Apr 2013 13:58:53 #24 |
  5. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    I just realised I didn't do a reboot, so I just did that and it seems the channel list has changed to nearly what I had edited, it's possible I had missed a few.

    | Sat 20 Apr 2013 14:46:29 #25 |
  6. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    sloppyjoe - 57 minutes ago  » 
    No #16 did not restore my channels, perhaps I am not doing it correctly. I still have all the channels from overnight.

    If you turn off power saving on the Foxsat settings and put it into standby does it show the correct hour?
    If you did uninstall the patch then ls -l /opt/bin/settop* should not find anything.
    Can you post the result of echo $TZ
    If it is not the following:
    GMT+0BST,M3.5.0/1,M10.5.0/2
    then
    TZ=GMT+0BST,M3.5.0/1,M10.5.0/2
    and reboot.

    | Sat 20 Apr 2013 15:06:14 #26 |
  7. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    Power saving off, correct time is displayed,,,

    echo $TZ...returns ,,,nothing !

    I did this...TZ=GMT+0BST,M3.5.0/1,M10.5.0/2

    and rebooted, echo $TZ still returns nothing...

    | Sat 20 Apr 2013 15:43:05 #27 |
  8. User has not uploaded an avatar

    raydon

    special member
    Joined: Feb '11
    Posts: 159

    offline

    sloppyjoe - 1 hour ago  » 
    Power saving off, correct time is displayed,,,
    echo $TZ...returns ,,,nothing !
    I did this...TZ=GMT+0BST,M3.5.0/1,M10.5.0/2
    and rebooted, echo $TZ still returns nothing...

    I suspect that you may have flashed with a version of CFW that I released as a quick-fix when the cause of the time problem had still not been determined to be caused by the nowster patch. This quick-fix version had the timezone setting removed. I took down the link the next day and advised everyone who installed it to reflash with the original v4.1.1. I suggest you download it again from one of the links contained in the post here and reflash your box.

    | Sat 20 Apr 2013 17:20:30 #28 |
  9. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    I will reflash as soon as the rugger match, that I'm recording is finished !

    | Sat 20 Apr 2013 18:26:43 #29 |
  10. sloppyjoe

    sloppyjoe

    special member
    Joined: Jul '11
    Posts: 231

    offline

    I just reflashed it, and then entered echo $TZ and it came back with

    GMT+0BST,M3.5.0/1,M10.5.0/2

    I think we have success, tomorrow will tell for certain..

    | Sat 20 Apr 2013 20:05:41 #30 |

RSS feed for this topic

1234

Reply »

You must log in to post.