Downgrade Raydons Software « My Humax Forum

My Humax Forum » Freesat HD » FOXSAT HDR

Downgrade Raydons Software

(13 posts)

nitramhdr

junior member
Joined: Jan '13
Posts: 5
offline

Hi How do remove or downgrade Raydons Software, as i am having lots of problems.
Many Thanks

Nitramhdr

| Fri 7 Jun 2013 16:28:09 #1 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

What problems ? It's very unlikely the CF is to blame. It doesn't change the way the box works when not used with a PC, nor alter the existing software apart from a different message when booting the box.

In fact retaining it is likely to make it easier to find out what the problem is.

| Fri 7 Jun 2013 16:38:42 #2 |
aldaweb

administrator
Joined: Feb '11
Posts: 400
offline

Hi Nitramhdr and welcome to the forum

I assume this is for the Foxsat HDR so moved to the correct Forum

| Fri 7 Jun 2013 17:37:46 #3 |
nitramhdr

junior member
Joined: Jan '13
Posts: 5
offline

Yes sorry forgot to say its a foxsat HDR!
I am not seeing any of the recorded program's although the hard drive
Is a 37%.
It dose not always do this but when it plays up I power down at the
Wall and I can see program's again!
Thanks
Nitramhdr

| Fri 7 Jun 2013 19:00:04 #4 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

nitramhdr - 4 minutes ago »
Yes sorry forgot to say its a foxsat HDR!
I am not seeing any of the recorded program's although the hard drive
Is a 37%.
It dose not always do this but when it plays up I power down at the
Wall and I can see program's again!
Thanks
Nitramhdr

Firstly try a factory reset.

If it's not still under warranty.

With the power off, remove the lid and the HDD carrier. Try removing and re-seating the cables connected to the HDD. It could be just a intermittent bad connection.

If you aren't already on CF 1.04.11 reflash to the latest version.

The CF won't be the cause of the problem.

| Fri 7 Jun 2013 19:09:58 #5 |
nitramhdr

junior member
Joined: Jan '13
Posts: 5
offline

Ok got up at 5.30am today removed the hard drive and cleaned all the pins cables that I could see, next thing to do is look for the software update (flash) my software version is HPRSFCI 1.00.21 how do I upgrade the the latest version!
Thanks.

| Sat 8 Jun 2013 5:26:09 #6 |
dino

special member
Joined: Dec '11
Posts: 197
offline

I believe v1.00.21 is the latest (and probably final) official release for the HDR.

http://beta.humaxonline.co.uk/downloads/foxsat-hdr

| Sat 8 Jun 2013 6:05:21 #7 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

nitramhdr - 3 hours ago »
Ok got up at 5.30am today removed the hard drive and cleaned all the pins cables that I could see, next thing to do is look for the software update (flash) my software version is HPRSFCI 1.00.21 how do I upgrade the the latest version!
Thanks.

If you have installed the Custom Firmware 1.0.11 it will also have installed the latest Humax Firmware 1.0.21 as part of the process anyway.

| Sat 8 Jun 2013 8:58:19 #8 |
nitramhdr

junior member
Joined: Jan '13
Posts: 5
offline

I've removed the hard drive and cleaned the cables etc, but I still have the same problem! What do I do now?
Thanks

| Sun 9 Jun 2013 13:29:05 #9 |
REPASSAC

special member
Joined: Mar '11
Posts: 4,100
offline

Did you do a factory reset as Graham suggested?

If yes, then I would try running the CF disk-fix utility to see if disk problems exist.

| Sun 9 Jun 2013 13:44:50 #10 |