My Humax Forum » Freeview HD » YouView DTR-T

DTR T2000 not responding to remote; can't record

(4 posts)
  1. User has not uploaded an avatar

    OLLY B

    new member
    Joined: Jul '15
    Posts: 2

    offline

    Had been working fine until a couple of days ago, when the T2000 wouldn't respond to my remote control...as a result, cannot change channel nor watch recorded programmes. In fact it does nothing! The YouView button won't work so nothing can be recorded. Checked batteries - they're fine; turned off at the wall - nothing changed. Any ideas?! Thanks

    | Sat 25 Jul 2015 22:29:10 #1 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Try forcing the remote to the default code list.
    https://myhumax.org/forum/topic/multi-code-function-hdhdr-remote

    | Sun 26 Jul 2015 8:19:08 #2 |
  3. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,991

    offline

    Welcome to our Forum

    Whilst changing remote code is not actually active on the DTR T2000 unit, the remote can be reprogrammed so not a bad idea to check - The default for youview units is code 1.

    You can also check the remote is sending a signal by viewing through a digital camera.

    Do the buttons on the unit work?

    | Sun 26 Jul 2015 9:40:32 #3 |
  4. User has not uploaded an avatar

    OLLY B

    new member
    Joined: Jul '15
    Posts: 2

    offline

    Thank you both for your help. Problem solved, faulty scart lead!

    | Sun 26 Jul 2015 11:07:56 #4 |

RSS feed for this topic

Reply

You must log in to post.