My Humax Forum » Freesat HD » FOXSAT HDR

Foxsat-HDR not responding

(3 posts)
  1. User has not uploaded an avatar

    wessy

    new member
    Joined: Oct '14
    Posts: 2

    offline

    Hi,

    My human is on but is not responding to my remote control. I have checked I have the PVR button on (shows red when I press it) I have also checked that there is a signal coming out of the remote itself. But what ever button I press on the remote the box does not respond. Any suggestions please

    | Fri 10 Oct 2014 18:47:38 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Hi welcome to the forum.

    Firstly does the box work with the controls revealed when you pull down the front flap ?

    The humax remote controls can be set to control multiple Humax units though this is the first time I have seen one changing it's channel from the default of 1(unless you have multiple Humax boxes in the same room).

    Otherwise try switching off the box using the power switch (rear left) and powering up again say 5 minutes later). Note the box will wake up and shut down again, after this boot the box as normal.

    | Fri 10 Oct 2014 20:59:22 #2 |
  3. User has not uploaded an avatar

    wessy

    new member
    Joined: Oct '14
    Posts: 2

    offline

    Hi Graham,

    Thanks , the turning it off and on via that switch worked.

    Thank you

    Mark

    | Sun 12 Oct 2014 17:32:26 #3 |

RSS feed for this topic

Reply

You must log in to post.