My Humax Forum » Freeview HD » FVP 4000T, 5000T

FVP4000T. All previous recordings have vanished ?.

(10 posts)
  1. graham uk

    graham uk

    special member
    Joined: Jun '16
    Posts: 164

    offline

    All previous recordings have vanished ?.

    FVP4000T.Latest OS. Setup a recording for later in the evening. Checked the following morning and nothing recorded, but worse still all previous recording had gone.!!!
    Ran HD check and everything fine so as no recordings decided to Format.

    Question. Has this happened to any other member ?.

    graham uk

    | Tue 19 Dec 2017 11:11:49 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,035

    offline

    Once, power cycle restored everything...

    | Tue 19 Dec 2017 11:45:11 #2 |
  3. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Twice on another Humax unit.
    Once a standby cycle restored all, the other time a power cycle did the trick.

    | Tue 19 Dec 2017 12:13:06 #3 |
  4. graham uk

    graham uk

    special member
    Joined: Jun '16
    Posts: 164

    offline

    Barry - 5 hours ago  » 
    Once, power cycle restored everything...

    Barry. Can you give more info please.
    REPASSAC. More info please.

    graham uk

    | Tue 19 Dec 2017 17:28:01 #4 |
  5. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    graham uk - 8 minutes ago  » 

    Barry - 5 hours ago  » 
    Once, power cycle restored everything...

    Barry. Can you give more info please.
    REPASSAC. More info please.
    graham uk

    You should have removed the power for 10 mins or so. Unlikely to help now as you have formatted the HDD.

    | Tue 19 Dec 2017 17:38:49 #5 |
  6. graham uk

    graham uk

    special member
    Joined: Jun '16
    Posts: 164

    offline

    grahamlthompson - 11 minutes ago  » 

    graham uk - 8 minutes ago  » 

    Barry - 5 hours ago  » 
    Once, power cycle restored everything...

    Barry. Can you give more info please.
    REPASSAC. More info please.
    graham uk

    You should have removed the power for 10 mins or so. Unlikely to help now as you have formatted the HDD.

    Thank you...I'll know what to do if it happens again. Pity I did not no this info before formatting which to ensure a clean start

    | Tue 19 Dec 2017 17:52:39 #6 |
  7. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    graham uk - 41 seconds ago  » 

    grahamlthompson - 11 minutes ago  » 

    graham uk - 8 minutes ago  » 

    Barry - 5 hours ago  » 
    Once, power cycle restored everything...

    Barry. Can you give more info please.
    REPASSAC. More info please.
    graham uk

    You should have removed the power for 10 mins or so. Unlikely to help now as you have formatted the HDD.

    Thank you...I'll know what to do if it happens again. Pity I did not no this info before formatting which to ensure a clean start

    You could have asked before formatting

    | Tue 19 Dec 2017 17:53:57 #7 |
  8. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    graham uk - 14 hours ago  » 

    Barry - 5 hours ago  » 
    Once, power cycle restored everything...

    Barry. Can you give more info please.
    REPASSAC. More info please.
    graham uk

    The twice it happened was just after startup both on my HDR-1000S.
    I have seen other posts on other units suggesting the same problem.

    | Wed 20 Dec 2017 7:50:34 #8 |
  9. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,035

    offline

    I believe accessing recordings shortly after boot sometimes results in zero contents initially, as the unit is 'busy' with all sorts of housekeeping eg populating the guide.

    | Wed 20 Dec 2017 9:00:02 #9 |
  10. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Barry - 51 minutes ago  » 
    I believe accessing recordings shortly after boot sometimes results in zero contents initially, as the unit is 'busy' with all sorts of housekeeping eg populating the guide.

    My 15 minute power on timer at 07:00 should ensure that the first manual boot is with a fully populated epg for most.

    | Wed 20 Dec 2017 9:53:33 #10 |

RSS feed for this topic

Reply

You must log in to post.