My Humax Forum » Freeview HD » FVP 4000T, 5000T

FVP5000T Not Responding To The Remote Control

(2 posts)
  1. User has not uploaded an avatar

    JW.LEES

    new member
    Joined: Oct '22
    Posts: 2

    offline

    Hi,
    My box has stopped responding to the remote control, I have another box in the house and checked the remote with this and it worked fine. The buttons on the box still work ok. Is there a way of resetting the box without using the remote control maybe using the buttons on the box ?

    | Fri 11 Nov 2022 11:17:55 #1 |
  2. User has not uploaded an avatar

    EEPhil

    special member
    Joined: Oct '14
    Posts: 280

    offline

    Assuming you haven't changed the code on the remote because you have multiple Humaxes in the same room...
    If the buttons on the box work and the box is on, power down using the right hand button. Wait for the disk to go silent. If the box is already off you should be okay. If the box won't respond to the off button on the box you'd have to follow the next step anyway! Switch off at the plug, wait a few seconds and the switch on. When the box restarts you should be able to control it with the remote.

    If you have multiple Humaxes in the same room, or have inadvertently changed the remote code see https://myhumax.org/forum/topic/multi-code-function-hdhdr-remote-2

    | Fri 11 Nov 2022 14:17:57 #2 |

RSS feed for this topic

Reply

You must log in to post.