My Humax Forum » Freesat HD » FOXSAT HDR

HUMAX FOXSAT-HDR s/w reboot problem

(3 posts)
  1. User has not uploaded an avatar

    MalEvans

    new member
    Joined: Sep '11
    Posts: 2

    offline

    I've had the receiver for less than 1 year with no problems. Recently when changing certain TV channels, the box seems to re-boot

    HDMi1
    576i ...1080i/50 etc appears on the screen.

    Any ideas

    Cheers

    Mal

    | Mon 12 Sep 2011 21:52:12 #1 |
  2. gomezz

    gomezz

    special member
    Joined: Mar '11
    Posts: 943

    offline

    What firmware version are you running? It should have automatically been updated OTA earlier this year to 1.00.15 but that assumes you put the box into standby overnight (updates including channel changes occur at 3am). Given it happens when you change channels I suggest that first thing to try is a full channel rescan:-

    Menu -> Setup -> Freesat Tune

    I assume that you have not got any non-Freesat channels tuned in which are the ones causing the reboot?

    If that does not help then you could try a Factory Reset:-

    Menu -> Setup -> Factory Reset

    This won't delete your existing recordings but you will lose your timers and need to set them up again.

    | Tue 13 Sep 2011 8:30:41 #2 |
  3. User has not uploaded an avatar

    MalEvans

    new member
    Joined: Sep '11
    Posts: 2

    offline

    Gomezz

    The Factory Reset worked a treat. Many Thanks Mal

    | Tue 13 Sep 2011 22:02:27 #3 |

RSS feed for this topic

Reply

You must log in to post.