My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freeview HD » HDR FOX T2

1. 

   stevieboy
   

   senior member
   Joined: Nov '11
   Posts: 56

   offline

   Hi,

   My Hummy crashed a couple of hours ago whilst I was watching a recording from last night.
   Now it won't stay up long enough for me to be able to do very much with it.
   It is running:
   Custom Firmware 2.22
   Software version FHTCP 1.03.12
   Loader Version a7.30
   I tried a reset to default but it crashed during the channel search and then again during the setup wizard.
   I've unplugged everything except the wi-fi dongle connector (Ethernet cable socket stopped working a while back) and although I can view recordings it crashes again after a short while.
   I tried connecting via putty to start it up in maintenance mode and can do this. I tried to run Check and repair hard disk and this is what it did:

   Menu version 1.07
   Enter system PIN: ****
   /---------------------------------------------\
   | M A I N T E N A N C E M O D E M E N U |
   \---------------------------------------------/
   [ Humax HDR-Fox T2 (humax) 1.03.12/2.22 ]
   1 - Check and repair hard disk (fix-disk).
   2 - Run short hard-disk self test.
   3 - Run long hard-disk self test.
   4 - Check self-test progress.
   epg - Clear persistent EPG data.
   x - Leave maintenance mode (Humax will restart).
   diag - Run a diagnostic.
   cli - System command line (advanced users).
   Please select option: 1
   Any additional options (or press return for none):
   Are you sure you wish to run the hard disk checker? [Y/N] y
   Running /bin/fix-disk
   Custom firmware version 2.22

   Checking disk sda
   Unmounted /dev/sda1
   Unmounted /dev/sda2
   Unmounted /dev/sda3
   Running short disk self test
   No pending sectors found - skipping sector repair
   Using superblock 0 on sda1
   Using superblock 0 on sda2
   Using superblock 0 on sda3

   Checking partition /dev/sda3...
   e2fsck 1.41.14 (22-Dec-2010)
   Pass 1: Checking inodes, blocks, and sizes
   Pass 2: Checking directory structure
   Pass 3: Checking directory connectivity
   Pass 4: Checking reference counts
   Pass 5: Checking group summary information
   /dev/sda3: 14/655776 files (7.1% non-contiguous), 351014/2622611 blocks
   Checking partition /dev/sda1...
   e2fsck 1.41.14 (22-Dec-2010)
   Pass 1: Checking inodes, blocks, and sizes
   Pass 2: Checking directory structure
   Pass 3: Checking directory connectivity
   Pass 4: Checking reference counts
   Pass 5: Checking group summary information
   /dev/sda1: 14/65808 files (0.0% non-contiguous), 14287/263064 blocks
   Checking partition /dev/sda2...
   e2fsck 1.41.14 (22-Dec-2010)
   Pass 1: Checking inodes, blocks, and sizes
   Pass 2: Checking directory structure
   Pass 3: Checking directory connectivity
   /lost+found not found. Create? yes
   Pass 4: Checking reference counts
   Pass 5: Checking group summary information
   /dev/sda2: ***** FILE SYSTEM WAS MODIFIED *****
   /dev/sda2: 2301/29860704 files (6.5% non-contiguous), 61057987/119209984 blocks
   Removing extra swap space.
   Are you having problems with a delete loop? [Y/N]: n
   Skipped
   Finished
   Press return to continue:

   Rebooted the box and tried a channel search and it 'crashed' at 18%
   Does this mean anything to anyone? Oh, I've had the box for 4 + years I think.

   Thanks in advance

   | Sun 31 Aug 2014 12:07:37 #1 |
2. 

   stevieboy
   

   senior member
   Joined: Nov '11
   Posts: 56

   offline

   Also disconnected the HDD. The unit still crashes after approx. 5 mins.

   | Sun 31 Aug 2014 14:35:49 #2 |
3. 

   chrisdaniels
   

   special member
   Joined: Mar '12
   Posts: 130

   offline

   Why are you asking here rather than the website where you got the custom firmware from?

   | Sun 31 Aug 2014 16:09:46 #3 |
4. 

   Barry
   

   senior admin
   Joined: Feb '11
   Posts: 11,051

   offline

   When you say unplugged everything, do you mean everything - aerial, lan etc.

   If not try a factory reset with only power and tv connected, nothing else, when it starts channel search switch off reconnect aerial and switch on to continue.

   Should that not be successful then I would try reloading firmware as a next step.

   | Sun 31 Aug 2014 18:25:32 #4 |
5. 

   Wallace
   

   special member
   Joined: Mar '11
   Posts: 118

   offline

   chrisdaniels - 15 hours ago  » 
   Why are you asking here rather than the website where you got the custom firmware from?

   He did, and well before you posted this

   | Mon 1 Sep 2014 7:45:09 #5 |
6. 

   stevieboy
   

   senior member
   Joined: Nov '11
   Posts: 56

   offline

   I'm desperate so asking as many people as possible for info.
   Yes Barry, I tried with everything except power plugged in. I was able to reload the firmware but still no dice. The box stays up and responsive now for approx. a couple of minutes only.
   Also there is a kind of beep sound sometimes when it crashes.
   I doubt it's a HDD issue as it's still unplugged so reformatting it wouldn't fix it. What do you guys think?
   One other thing I've noticed since yesterday is that when it crashes and I switch it off from the back, sometimes when I switch it back on, nothing happens - i.e. no power to the unit. Could this indicate a faulty power unit that causes the box to crash maybe?

   | Mon 1 Sep 2014 8:32:57 #6 |
7. 

   Wallace
   

   special member
   Joined: Mar '11
   Posts: 118

   offline

   I am sorry for your woes. You are obviously trying very hard to get things sorted. I have been following you over at Hummy.tv

   You appear to be doing everything right, but it really does sound like a hardware problem.

   It could be a PSU issue, I have had PC power supplies go like that. Start to power up then fail.

   Silly question, but do you have access to another unit you could perhaps temporarily swap-out the PSU?

   Sorry I am not much help.

   | Mon 1 Sep 2014 8:55:07 #7 |
8. 

   stevieboy
   

   senior member
   Joined: Nov '11
   Posts: 56

   offline

   Thanks, but I don't have access to another unit.

   Thanks to everyone that offered suggestions but I think I have to accept that it's dead. It won't even stay up now for more than a minute or two.

   Given that the HDD is disconnected I doubt that reformatting it would resolve this issue so I won't bother. I'll hopefully be able to rescue the SD recordings I have on there.

   If anyone can recommend a cable or dock to use with the HDD to copy off the files that would be great.

   Luckily I have my old 9200T that has been brought out of the loft.
   You certainly notice the diff between hdmi and scart

   | Mon 1 Sep 2014 9:45:00 #8 |
9. 

   MontysEvilTwin
   

   special member
   Joined: Jan '14
   Posts: 240

   offline

   Have you decrypted the SD recordings, either by copying them to a USB drive using the remote control and then copying them back to the internal drive, or by other methods? If not, there is no point trying to copy them now as they will be encrypted and only playable on the original HDR-FOX.

   | Mon 1 Sep 2014 9:57:10 #9 |
10. 

    Martin Liddle
    

    special member
    Joined: Feb '11
    Posts: 4,711

    offline

    stevieboy - 12 minutes ago  » 
    I'll hopefully be able to rescue the SD recordings I have on there.

    Only if they already been decrypted.

    If anyone can recommend a cable or dock to use with the HDD to copy off the files that would be great.

    You can use a USB to SATA adapter (for a 3.5" drive) eg Link to eBay which includes a power supply or any USB enclosure designed for a 3.5" SATA drive

    | Mon 1 Sep 2014 10:04:07 #10 |

RSS feed for this topic

Reply »

You must log in to post.