My Humax Forum » Freeview HD » HDR FOX T2

Info Display Time

(3 posts)
  1. GeeDeeEss

    GeeDeeEss

    member
    Joined: Feb '12
    Posts: 16

    offline

    Is there anyway to alter the length of time that the i-plate is shown on screen after having pressed the [i] button on the remote?

    menu>settings>preferences>screen display>info display time is set to 5 seconds

    I have noticed that this only affects the duration that the i-plate is shown when using the [p+ & p-] to select a channel. If I press the [i] button the i-plate will stay on screen for 30 seconds if left to time-out.

    Can this be altered?

    | Thu 23 Feb 2012 10:21:22 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,035

    offline

    No way to change it afaik - however you can get rid by pressing the exit button.

    Remember whilst the iplate is displayed the back button will change to previously viewed channel, so having it disappear to quickly would raise some complaints I suspect.

    | Thu 23 Feb 2012 10:33:56 #2 |
  3. GeeDeeEss

    GeeDeeEss

    member
    Joined: Feb '12
    Posts: 16

    offline

    I understand that it can be dismissed with the exit button however having an option would be nice.

    Is there any other way to show the i-plate?

    what are the known methods to bring up the i-plate on screen?

    | Thu 23 Feb 2012 10:41:39 #3 |

RSS feed for this topic

Reply

You must log in to post.