My Humax Forum » Freeview HD » FVP 4000T, 5000T

Is there a disk replacement guide for a 5000T

(4 posts)
  1. User has not uploaded an avatar

    mrg9999

    new member
    Joined: Oct '20
    Posts: 2

    offline

    Hi, first post.
    5000T hard drive upgrade.
    I would like to replace the hard drive ideally with an SSD.

    Is there a step by step guide or is it just a matter of installing drive and turning on and running a setup?

    | Mon 26 Oct 2020 9:06:31 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    mrg9999 - 27 mins ago  » 
    Hi, first post.
    5000T hard drive upgrade.
    I would like to replace the hard drive ideally with an SSD.
    Is there a step by step guide or is it just a matter of installing drive and turning on and running a setup?

    It's just a matter of replacing drive. Setup is completely automatic. You don't even lose your recording schedule as it's in NVram along with the firmware.

    | Mon 26 Oct 2020 9:36:26 #2 |
  3. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,711

    offline

    mrg9999 - 1 hour ago  » 
    I would like to replace the hard drive ideally with an SSD.

    If you want to fit an SSD then you want a decent quality one for it to have a reasonable lifetime. Be aware that the only real advantage of an SSD in a PVR is the absence of noise.

    Is there a step by step guide or is it just a matter of installing drive and turning on and running a setup?

    Just install the drive and when you turn it back on it will offer to format the new drive; no other setup needed.

    | Mon 26 Oct 2020 10:53:29 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    If you don't know how opening the case to access the hard drive can be confusing.

    There is a faq as to how to do this. You need a flat blade screwdriver to disengage the retaining clips.

    | Mon 26 Oct 2020 19:03:52 #4 |

RSS feed for this topic

Reply

You must log in to post.