Hi All programs have disappeared I have not done anything for this to happen
I would appreciate your help
My Humax Forum » Freeview HD » FVP 4000T, 5000T
Lost programs
(9 posts)-
| Tue 10 Mar 2020 17:39:01 #1 |
-
rexleroy - 17 mins ago »
Hi All programs have disappeared I have not done anything for this to happen
I would appreciate your helpThe recorded programme list can take a minute or so to load just after a boot especially if you have a lot. Simply press exit wait a minute or so and press the recordings button again.
| Tue 10 Mar 2020 17:58:40 #2 | -
Hi thanks for the reply,next to the programs it shows nill programs
| Tue 10 Mar 2020 18:06:46 #3 | -
Do you mean recorded programmes or programmes on the programme guide?
| Tue 10 Mar 2020 18:47:37 #4 | -
rexleroy - 53 mins ago »
Hi thanks for the reply,next to the programs it shows nill programsWhen you press the recordings button on the remote and select programme what do see ?
Alongside the blue highlighted Programme there is a white oval that tells you how many recordings you have mine says 240. At the top right is a pie chart that tells you total recordings and how much space you have for more recordings.
| Tue 10 Mar 2020 19:05:27 #5 | -
Hi trev I mean recorded programs.Tonight I recorded 5 programs and everything seems fine.But all the other recordings have disappeared
| Tue 10 Mar 2020 21:09:49 #6 | -
Hi Graham it said you have to go to programs and press to record
I have not done anything for this to happen. I have recorded five recordings today and have all appeared on the programme list| Tue 10 Mar 2020 21:21:13 #7 | -
rexleroy - 10 mins ago »
Hi trev I mean recorded programs.Tonight I recorded 5 programs and everything seems fine.But all the other recordings have disappearedTell us the exact button sequence you pressed to look at what you have recorded.
Did you choose to record the complete series or just the one programme from the prompt from the epg ?
Did you press OK from the epg or press the recording button when you set the recording ?
OK gives you the options to record the whole series or just the one programme.
Record lets you create a recording of the whole programme provided the box was tuned to that channel when you were viewing the channel. This uses the box cabability to use the time shift buffer that enables live pause.
Suspect you don't know the difference between
Recordings - Complete recordings already on your hard disk. Either one off or series recordings within a series folder.
Scheduled - Recordings that will be recorded within the next 7 days within the current available epg content.
Your answers are too vague as to give us a clue what the issue is,
| Tue 10 Mar 2020 21:30:01 #8 | -
Thank you all for your help.All programs have returned
| Wed 11 Mar 2020 6:45:00 #9 |
Reply
You must log in to post.