My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freesat HD » FOXSAT HDR

1. 

   snoopy
   

   member
   Joined: Feb '14
   Posts: 10

   offline

   My wife asked me what was wrong with the Humax Foxsat HDR.

   She had pressed the "i" remote button expecting to get the current programme and times displayed, however the programme info displayed was from 13:15 and the current time was 18:06. Using the right and left button worked fine but not after pressing "i" on the remote. Still got same problem nearly 3 hours later. Normally you cannot get the previous programmes on the display.

   Running Radyon 4.1.1 custom software, not been an issue in 4 years since installed.

   Anyone any ideas?

   | Sat 10 Feb 2018 20:53:02 #1 |
2. 

   grahamlthompson
   

   special member
   Joined: Feb '11
   Posts: 14,442

   offline

   Try removing the power for 10 mins. After restoring power let the box reboot to start the clock and shut down. Re-boot and see if the problem exists. The symptoms suggest the internal clock has failed.

   | Sat 10 Feb 2018 21:37:13 #2 |
3. 

   hallchr
   

   member
   Joined: Jan '18
   Posts: 19

   offline

   odd as it seems I am having the same problem!

   | Sat 10 Feb 2018 22:12:12 #3 |
4. 

   hammocks
   

   junior member
   Joined: Feb '18
   Posts: 5

   offline

   Snoopy - noticed the same problem on my HDR. Tried unplugging, but no improvement. Is it something to do with the epr, seeing as we are both having the same problem. I hope it sorts itself out.

   | Sat 10 Feb 2018 22:12:21 #4 |
5. 

   hallchr
   

   member
   Joined: Jan '18
   Posts: 19

   offline

   We could always blame the Nort Koreans, they seemed to get blamed for most things

   | Sat 10 Feb 2018 22:14:18 #5 |
6. 

   snoopy
   

   member
   Joined: Feb '14
   Posts: 10

   offline

   Ok thanks Graham, will check that again, did power off and waited a couple of minutes, maybe not long enough, it shows the correct time on the top line of the "i" display but the programme is still from 13:15, and does not change. Guide works fine as well. Telnet shows the system time correct as well. But yes could be the clock chip, I guess it must get its time from the satellite or NTP as its networked, although NTP often doesn't correct the time if its too far out of sync.

   | Sat 10 Feb 2018 22:14:20 #6 |
7. 

   hallchr
   

   member
   Joined: Jan '18
   Posts: 19

   offline

   We could always blame the Nort Koreans, they seemed to get blamed for most things

   | Sat 10 Feb 2018 22:15:02 #7 |
8. 

   shazza424
   

   new member
   Joined: Feb '18
   Posts: 1

   offline

   we are having the same problem we are in the south west of England and our info is stuck at 13:15 as well means that all my recordings are not happening as it does not know that they are on.

   | Sat 10 Feb 2018 22:21:40 #8 |
9. 

   hammocks
   

   junior member
   Joined: Feb '18
   Posts: 5

   offline

   My programmes are recording okay, despite the info being stuck at 16.00 hrs. When I am on the epg, I cannot jump to a different channel, so I have set the channel number manually.

   | Sat 10 Feb 2018 22:29:44 #9 |
10. 

    Inkysloth
    

    new member
    Joined: Feb '18
    Posts: 1

    offline

    Just joined to add my name to the list of people with this issue!

    also tried:
    - Switching off & on
    - Unplugging at wall & plugging back in
    - Looking for software update (nope!)

    Somewhat comforted it's not just us.

    | Sat 10 Feb 2018 22:42:24 #10 |

RSS feed for this topic

Reply »

You must log in to post.