My Humax Forum » Freeview HD » FVP 4000T, 5000T

Problem with remote control not working.

(5 posts)
  1. User has not uploaded an avatar

    Apache

    Ex Member
    Joined: Aug '19
    Posts: 132

    offline

    Hello,

    I have had to reset my remote control as it had issues the reset when fine, but now when I press any button on the remote control nothing happens the box does not even turn on.

    I have a youview box and when I press any button on the Humax remote control for the FVP 5000T box the remote control turns the youview box on.

    Any help would be appreciated

    Thanks

    Matthew

    | Tue 16 Nov 2021 21:23:23 #1 |
  2. User has not uploaded an avatar

    Apache

    Ex Member
    Joined: Aug '19
    Posts: 132

    offline

    Hello,

    The issue is now fixed.

    Thanks

    | Thu 18 Nov 2021 20:24:34 #2 |
  3. User has not uploaded an avatar

    Baldrick

    new member
    Joined: Feb '22
    Posts: 2

    offline

    Hi

    How did you fix this, please?

    My Remote Controller has stopped working on my Humax HDR 1100S Freesat box and has also decided to control my Youview box instead.

    I have carried out "Remote Control - Reset" instructions...

    "Press the Power and RED buttons at the same time for 5 seconds until the red LED blinks three times."

    ...but the red LED does not blink.

    Batteries are okay as the Youview box is responding.

    The buttons on the box work, i.e. on/off, change channel, change volume, and I have disconnected the power to give a complete reboot.

    I also have a spare Remote which likewise is now controlling the Youview box.

    Am I missing something?

    Rick

    | Sat 5 Feb 2022 9:43:56 #3 |
  4. User has not uploaded an avatar

    Luke

    special member
    Joined: Apr '11
    Posts: 1,496

    offline

    By default the remote controls for Humax Freesat and Freeview boxes do also control Youview boxes.
    The remotes for the Humax Freesat and Freeview boxes can be changed to a different code set so that they do not also control the youview box, but the associated recorders do also have to have their code set changed.

    It sounds as though the code sets being used on your 1100S and its remote have got out of sync with each other.

    For details of how to bring them back in line for the HDR-1100S see
    https://myhumax.org/forum/topic/multi-code-function-hdhdr-remote-2

    For the FVP-5000T the process is the same
    https://myhumax.org/forum/topic/multi-code-function-fvp-remote

    | Sat 5 Feb 2022 10:08:37 #4 |
  5. User has not uploaded an avatar

    Baldrick

    new member
    Joined: Feb '22
    Posts: 2

    offline

    Thanks Luke, that has resolved the issue.

    I now remember doing that before on an older Humax box quite a few years ago.

    I am greatly relieved. Thumbs up from me!

    | Sat 5 Feb 2022 16:24:19 #5 |

RSS feed for this topic

Reply

You must log in to post.