My Humax Forum » Freeview HD » FVP 4000T, 5000T

Remote control

(10 posts)
  1. User has not uploaded an avatar

    gel

    junior member
    Joined: Dec '15
    Posts: 7

    offline

    At the top ot the Humax remote control there are 3 buttons
    2 marked TV and a red button indicating off/on
    What do the 2 buttons do
    At present there is no response when pressed
    I turn the TV on by Pressing the TV (Panasonic TX-40C300B) on button followed by the red button on the Humax
    Can anyone help please
    gel

    | Fri 4 Dec 2015 10:15:58 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,041

    offline

    You can programme the Humax remote to control functions on your tv.

    The left button is to power tv on/off
    The centre (av) button controls the source, HDMI 1, HDMI 2, AV etc

    For example on the Sony tv I am currently sat in front of the centre button displays a lists of the inputs available an the tv and I can cycle through them with presses of the av button

    | Fri 4 Dec 2015 10:24:40 #2 |
  3. User has not uploaded an avatar

    gel

    junior member
    Joined: Dec '15
    Posts: 7

    offline

    Thank you Barry for your very quick responce
    Yes on my TV remote I can do as you say but not on the Humax remote
    Using the Humax remote I cannot switch on the TV or control the source
    gel

    | Fri 4 Dec 2015 10:29:29 #3 |
  4. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,041

    offline

    Have you programmed the remote?

    Page GB 35 of user manual.

    | Fri 4 Dec 2015 10:33:44 #4 |
  5. User has not uploaded an avatar

    gel

    junior member
    Joined: Dec '15
    Posts: 7

    offline

    No I have not
    Thank you very much I am confident the issue will now be resolved
    Many thanks
    gel

    | Fri 4 Dec 2015 10:41:55 #5 |
  6. User has not uploaded an avatar

    gel

    junior member
    Joined: Dec '15
    Posts: 7

    offline

    gel - 1 day ago  » 
    Thank you Barry for your very quick responce
    Yes on my TV remote I can do as you say but not on the Humax remote
    Using the Humax remote I cannot switch on the TV or control the source
    gel

    Setting the remote control for Humax FVP-4000T p35
    I need a little more help please
    What I have done
    Pressed TV STANBY button & OK for 3 secs
    The STANDBY button lights up
    Entered 3 digits code
    For the Panasonic TX-40C300B there are 15 codes
    I have tried most of them
    HOW DO I KNOW WHICH IS THE CORRECT ONE ?
    When do I press OK?

    I have also tried setting the Code Randomly using the CH^/down Still without success

    A question
    Does the TV need to be on whilst I am setting up
    I have tried with the tv on and off but it does not work
    You comment would be most appreciated
    gel

    | Sat 5 Dec 2015 12:16:57 #6 |
  7. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    gel - 8 minutes ago  » 

    gel - 1 day ago  » 
    Thank you Barry for your very quick responce
    Yes on my TV remote I can do as you say but not on the Humax remote
    Using the Humax remote I cannot switch on the TV or control the source
    gel

    Setting the remote control for Humax FVP-4000T p35
    I need a little more help please
    What I have done
    Pressed TV STANBY button & OK for 3 secs
    The STANDBY button lights up
    Entered 3 digits code
    For the Panasonic TX-40C300B there are 15 codes
    I have tried most of them
    HOW DO I KNOW WHICH IS THE CORRECT ONE ?
    When do I press OK?
    I have also tried setting the Code Randomly using the CH^/down Still without success
    A question
    Does the TV need to be on whilst I am setting up
    I have tried with the tv on and off but it does not work
    You comment would be most appreciated
    gel

    With the TV on so you can see which works. Continue entering codes until the TV switches off. When the TV switches off press OK to save the code.

    | Sat 5 Dec 2015 12:27:09 #7 |
  8. User has not uploaded an avatar

    gel

    junior member
    Joined: Dec '15
    Posts: 7

    offline

    Thank you very much for your comment
    With the TV switched on and using the Humax remote I have tried the 15 listed codes in the manual twice
    I have also tried the CH up and down buttons for 15 mins

    None have worked
    gel

    | Sat 5 Dec 2015 13:52:27 #8 |
  9. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    A few Panasonic TV's are rebadged Vestel TV's. Might be worth trying any codes listed for this make.

    | Sat 5 Dec 2015 14:22:40 #9 |
  10. User has not uploaded an avatar

    gel

    junior member
    Joined: Dec '15
    Posts: 7

    offline

    Thank you
    I have tried the 7 codes listed under Vestel TVs without any sucess
    gel

    | Sat 5 Dec 2015 14:41:51 #10 |

RSS feed for this topic

Reply

You must log in to post.