Samba File Transfer « My Humax Forum

My Humax Forum » Freeview HD » FVP 4000T, 5000T

Samba File Transfer

(4 posts)

quincunx

member
Joined: Mar '18
Posts: 16
offline
I’m having difficulty getting the Samba file sharing to work with my Windows 7 PC which like the FVP is connected to my router via ethernet cable. I have turned on Samba via Settings > Advanced Settings > File Share > Samba Server ON. I’ve looked at Barry’s post on the topic but the FVP-5000T does not appear as a network location. What I get is shown in the attached jpeg. I’m guessing there is something I need to do at the Windows PC end but what? Advice and suggestions would be appreciated
Attachments
1. Network.JPG (28.4 KB, 21 downloads) 6 years old
| Fri 30 Mar 2018 11:00:12 #1 |
BB

senior member
Joined: Oct '15
Posts: 87
offline

IIRC you need Windows 8 or 10.

| Fri 30 Mar 2018 14:22:52 #2 |
quincunx

member
Joined: Mar '18
Posts: 16
offline

Unfortunately exactly the same problem on my Windows 10 laptop as on the Windows 7 desktop computer. I think I must be missing some obvious setting somewhere either at the Windows end or the FVP end. These seem to be the relevant FVP settings:

1. Advanced Settings > Server Management > Network Server : should it be ON/OFF ?

2. Advanced Settings > File Share > FTP Server : should it be ON/OFF ?

3. Advanced Settings > File Share > SAMBA Server : ON ... obviously !

Not sure about the 1 and 2 settings. Do I need SAMBA software on the PC ?

| Fri 30 Mar 2018 15:35:02 #3 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

This may help.

https://support.microsoft.com/en-gb/help/4034314/smbv1-is-not-installed-windows-10-and-windows-server-version-1709

https://www.kapilarya.com/how-to-enable-or-disable-smb-protocols-in-windows-10

Network Server needs to be ON.

| Fri 30 Mar 2018 15:38:06 #4 |