sticks on wizard set-up then loops into reboot

(2 posts)

Rory21

new member
Joined: Nov '16
Posts: 1
offline

Hi,
I am lucky enough to have two Foxsat HDR machine that have both worked well for a couple of years, however last month turned one on and it went into the 4 part set-up wizard (checking correct cables connected etc.). When enter the post code the machine it then starts to search for TV and radio channels. Unfortunately it then reboots and loops into the same set-up wizard time and time again. I have swapped the machines over to check cabling is okay. and works fine on my other Foxsat so I know that is not the problem. I have also tried replacing the hard Drive but that has not worked. I have also tried pressing other button on the remote and the front panel but whilst in set-up no other function is available. Any help and suggestion would be greatly appreciated. Thanks in advance.

| Fri 25 Nov 2016 11:17:00 #1 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

Hi welcome to our forum.

Long shot - try reflashing the firmware.

http://beta.humaxonline.co.uk/downloads/foxsat-hdr

| Fri 25 Nov 2016 11:38:08 #2 |