My Humax Forum » Freeview HD » HDR 1800T, 2000T

Volume up stuck on - HDR-1800

(4 posts)
  1. User has not uploaded an avatar

    Scuders

    new member
    Joined: Mar '18
    Posts: 2

    offline

    Hi

    My volume up is stuck on, but I don't reckon it's the remote as I removed the button and if didn't stop. Anyone have/had the same problem and know how to fix it please? It obstructs the picture and also makes the 'ok' button almost redundant. (You have to press it repeatedly as fast as possible before it'll register!)

    Could it be the update?

    Cheers
    Davin

    | Fri 2 Mar 2018 22:40:11 #1 |
  2. User has not uploaded an avatar

    bill63

    special member
    Joined: Oct '15
    Posts: 215

    offline

    Hi Scuders

    Try unplugging your box and leaving for a few minutes or over night,
    sometimes this will clear any bugs.
    Next if this don't work do a factory reset.
    Another thing to look for is low batteries in the remote as they do not last long, always change them first to rule out the remote.

    You don't need to pull off the buttons on your remote, all you need do was to take the batteries out or take it in to another room to see if the banner went off.
    I think you may need a new remote now.

    | Sat 3 Mar 2018 12:20:54 #2 |
  3. User has not uploaded an avatar

    Scuders

    new member
    Joined: Mar '18
    Posts: 2

    offline

    Perfect thank you so much bill63 - I unplugged it for 24 hours and the problem has gone!

    | Wed 7 Mar 2018 22:43:52 #3 |
  4. User has not uploaded an avatar

    bill63

    special member
    Joined: Oct '15
    Posts: 215

    offline

    Hi Scuders
    I am glad I was able help. Most of the time a simple thing like unplugging your box for a while will clear most glitches from your box. But if not there is always someone on here who are able to help.

    | Thu 8 Mar 2018 15:23:52 #4 |

RSS feed for this topic

Reply

You must log in to post.