My Humax Forum » Freesat HD » FOXSAT HDR

Will not come out of ' boot'

(9 posts)
  1. User has not uploaded an avatar

    dougiow

    new member
    Joined: Sep '11
    Posts: 3

    offline

    Can anyone tell me why when I turned on my box tonight all I get is the boot message in the window.I have tried turning it off and on again and this has no effect,help Im missing my football.

    | Wed 28 Sep 2011 19:02:22 #1 |
  2. gomezz

    gomezz

    special member
    Joined: Mar '11
    Posts: 943

    offline

    Try powering it off for a few minutes.

    | Wed 28 Sep 2011 19:24:30 #2 |
  3. User has not uploaded an avatar

    dougiow

    new member
    Joined: Sep '11
    Posts: 3

    offline

    I have tried this and it still will not come out of 'boot'
    perhaps if I leave it longer? Is this a known problem?

    | Wed 28 Sep 2011 19:37:58 #3 |
  4. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    Welcome to the Forum

    I have seen one report of similar, and the owner left it powered off for 'a while' it then booted correctly the next time he switched it on.

    | Thu 29 Sep 2011 7:02:15 #4 |
  5. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    I had the same problem. You may prefer to call Humax support (and I suggest yoiu do) but what finally solved it for me was powering down, removeing the lid, disconnecting the hard disk power and sata leads and powering up.
    This worked fine (initial meesage no HD detected).
    Powered down reconnected - Powered up - all O.K. - very strange.
    Note: After power off the red Led seems to fade about the time the power supply capacitors would have discharged (wonder if this is by design?)

    | Thu 29 Sep 2011 9:03:32 #5 |
  6. User has not uploaded an avatar

    dougiow

    new member
    Joined: Sep '11
    Posts: 3

    offline

    Thanks for all you help it is now up and working.

    | Tue 11 Oct 2011 19:52:01 #6 |
  7. paulburke

    Paul

    senior member
    Joined: Mar '11
    Posts: 90

    offline

    dougiow - 1 hour ago  » 
    Thanks for all you help it is now up and working.

    Can you please tell us what you did, thanks.

    | Tue 11 Oct 2011 21:02:34 #7 |
  8. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Well you can see what I did - but I would try the absence from power for > 60 secs first.

    | Tue 11 Oct 2011 21:06:09 #8 |
  9. paulburke

    Paul

    senior member
    Joined: Mar '11
    Posts: 90

    offline

    REPASSAC - 12 hours ago  » 
    Well you can see what I did - but I would try the absence from power for > 60 secs first.

    I just wondered if the OP did anything different!

    | Wed 12 Oct 2011 9:25:43 #9 |

RSS feed for this topic

Reply

You must log in to post.