No, on the Sony, it just remains on the input selector screen and nothing else happens <img src="https://myhumax.org/forum/my-plugins/bb-smilies/default/icon_sad.gif" title=":(" class="bb_smilies" />

On my LG TV the Aura AV button lets me scroll to the appropriate input but as you say OK does nothing. However a few seconds after scrolling to an input the TV automatically selects the highlighted input. My old FVP-5000 does the same.

Same for me Rikki with my Aura and Sony, not a lot of point really.

Sony Bravia here. Managed to get the AV Input sidescreen to show using Iggy's suggestion of the Ch Up button (after many fails otherwise), but although the AV button toggles between the various input options, er, that's all it does - ie the sidescreen stays there and each press just highlights the next HDMI input - there's no OK option to actually select and close the sidescreen.
So not a lot of point to this <img src="https://myhumax.org/forum/my-plugins/bb-smilies/default/icon_sad.gif" title=":(" class="bb_smilies" />

Hi, had same issue with my Sony XE90. I didn't try a factory reset, what I did:

1. Hold TV power and OK to go into the setting where you normally type in the 3 digit code.

2. Press Ch Up button until TV turned off. Note I only had to do this once.

3. Hold OK button for 3 secs.

Note this is the same method for searching for your TV code/compatibility if you don't know the code, it's detailed in the online user manual. Except normally you might have to end up pressing the Channel Up button several times until you find your TV, which is why the code method is easier.

Hope that helps others, worked for me.

Perfect. Thank you.

Teabags157 - 5 mins ago  » 
Hi. How can I use my Humax remote control to turn my TV on/off, ie I’d like to just use one remote to control Humax 5000T and the TV. Thanks.

On the FVP go to Settings and then System Settings and turn on HDMI-CEC. If you pair the remote with the TV you can get a bit more control, see the section at the end of the manual (pages 34 and 35 in my copy) for the codes for each make of TV and the procedure

Hi. How can I use my Humax remote control to turn my TV on/off, ie I’d like to just use one remote to control Humax 5000T and the TV. Thanks.

My BT branded DTR-T2100 box is intermittently not responding to the remote control.
Seems to happen on start up from "Energy Saver". (I don't know about "Smart" or "Always Ready" power modes as I prefer the box to be using as little power as possible when not in use).

I switch on my TV using the same bt remote (batteries good) but the box will not respond to any function. I switch off the box with the button on the top of the box, it responds and shuts down, I then use the remote control to restart and it responds and so I wait the 2 minutes for it to finish loading up. I then try the remote control but nothing.

I repeat this process using the power switch on the back but get the same results, after reboot no response to remote control.

The only way I found to get the box to respond to the remote control again is to remove the power cable for 10 seconds. After plugging it back in and powering it on using the remote, waiting for it to finish loading, it then continues to function using the remote.

Anyone have this happen and possibly have the cure?

Very interesting, thanks. So it is a proper thing. Perhaps needs adding/pinning to the FAQs