My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

1000S not switching on

(5 posts)
  1. User has not uploaded an avatar

    Classic49

    junior member
    Joined: Aug '11
    Posts: 8

    offline

    Hi

    My HDR 1000S will not switch on from the box itself or the remote unless I briefly unplug from the mains. This "fix" will last about a day, ie I can switch the box off and on but the next day I have to unplug and plug in again to get the box to work again.

    Is there an internal battery that might be dead or is there another problem?

    | Thu 19 Jul 2018 6:41:06 #1 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Try turning off HDMI-CEC on your Television.
    Manufacturer names for HDMI-CEC: https://myhumax.org/forum/topic/hdmi-cec-known-as-by-manufacturer-3#post-46350
    After making the change reboot the TV then the Humax unit.
    I had to do one last power cycle on my HDR-1000S.

    | Thu 19 Jul 2018 6:51:42 #2 |
  3. User has not uploaded an avatar

    Classic49

    junior member
    Joined: Aug '11
    Posts: 8

    offline

    Hi

    I have an LG TV which uses SIMPLINK. I have never used it and can confirm that it is set to off. This problem has only recently started to occur with the same TV.

    | Thu 19 Jul 2018 7:16:49 #3 |
  4. andyfras

    andyfras

    senior member
    Joined: Nov '15
    Posts: 89

    offline

    I suspect capacitors (on the mainboard, not PSU).

    | Thu 19 Jul 2018 12:33:26 #4 |
  5. User has not uploaded an avatar

    Classic49

    junior member
    Joined: Aug '11
    Posts: 8

    offline

    I suspect capacitors (on the mainboard, not PSU).

    OK, thanks for the suggestion.

    | Thu 19 Jul 2018 19:09:15 #5 |

RSS feed for this topic

Reply

You must log in to post.