My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

9150 colour problem

(1 post)
  1. User has not uploaded an avatar

    Malnmag

    junior member
    Joined: Dec '16
    Posts: 8

    offline

    Hi all,
    I have just replaced our 9150 machine as it was becoming unreliable for recording. I decided to use it the bedroom but occasionally the picture is terrible, it is dark and the colour fades dark and light. The bedroom TV plays fine through he aerial but as soon as it plays through the humax the picture is terrible. I have tried adjusting picture in the TV settings, and have ensured that the output from the humax is RGB. I have tried several different scart leads. I removed the aerial lead between humax and TV as suggested in one of your forums. I have even removed the circuits from both the humax and the TV to check for dry solder joints to the scart sockets, all to no avail. As I said, the fault is intermittent, sometimes the picture is fine. Any suggestions would be welcome!

    | Mon 26 Dec 2016 22:05:08 #1 |

RSS feed for this topic

Reply

You must log in to post.