My Humax 9200T has worked well for the last 4 years but in the last couple of weeks has started acting up when recording programmes. The disc is currently about 65% full. When it records it lists the recorded programme as a duplicate recording of something recorded a couple of months ago. The most recent recording of Hunted showed up as a duplication of a Touch of Frost recorded in August - in fact it listed the Touch of Frost program 4 times, once for the actual Frost programme a the other 3 all Hunted. I've carried out a factory reset and retune but the problem still happens although not all the time as before. Any ideas?
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
9200T confused recording file names
(5 posts)-
| Mon 12 Nov 2012 20:19:48 #1 |
-
Coborn - 1 hour ago »
When it records it lists the recorded programme as a duplicate recording of something recorded a couple of months ago.These are classic signs of a corrupt file system. the fix is to watch any important recordings then format the hard drive from the HDD Control item in the Record Menu (default password 0000). Note that that if you do nothing the problem will get worse and you will suddenly be faced with a blank list of recordings,
| Mon 12 Nov 2012 21:41:43 #2 | -
Many thanks. Better get watching ready for reformat!
| Wed 14 Nov 2012 6:46:34 #3 | -
Hi and welcome to the forum
This problem is exacerbated if the unit is left powered on (not in standby) all the time. It is recommended that if you are not manually putting the unit into standby then you should set the automatic switch on and off times to something convenient e.g. overnight. If this doesn't apply in your case then consider it as advice for other readers who may be suffering a similar problem.If your feel competent enough you can remove the drive and connect to a computer in order to backup your recordings using humaxrw in recovery mode (available from the blog here - link). The usual disclaimer and caveats apply.
| Wed 14 Nov 2012 14:41:08 #4 | -
aldaweb - 16 minutes ago »
It is recommended that if you are not manually putting the unit into standby then you should set the automatic switch on and off times to something convenient e.g. overnight.I agree that when the problem has been fixed that putting the box into standby overnight is the correct thing to do. However there is some evidence to suggest that when significant corruption has occurred then leaving the box on all the time until it is convenient to format is more likely to keep the recordings visible.
| Wed 14 Nov 2012 15:00:45 #5 |
Reply
You must log in to post.
