My 9300T won't boot up. It briefly shows the 'application loader' and progress bar moving across then just goes blank. I've tried powering up with the SATA drive disconnected, but no joy. Any help would be appreciated (before I have to bin it).
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
9300 failure to boot up
(6 posts)-
| Sat 11 Sep 2021 8:27:56 #1 |
-
Chris_F - 16 mins ago »
My 9300T won't boot up. It briefly shows the 'application loader' and progress bar moving across then just goes blank. I've tried powering up with the SATA drive disconnected, but no joy.You have done the critical test and it failed. If it was me I wouldn't waste any more time and consign it to the bin. You can extract any important recordings from the hard drive using humaxrw and they will play on more modern Humax boxes and quite possibly boxes from other manufacturers.
| Sat 11 Sep 2021 8:47:19 #2 | -
Thank you Martin. I haven't heard of humaxrw. What is that?
| Sat 11 Sep 2021 10:15:14 #3 | -
Thanks
| Sun 12 Sep 2021 14:49:53 #5 | -
Assuming you still have the 9300t I've had same problems in the to past , I bought a new Humax fvp 5000 in Dec . Then I got the 9300t working again, open the left flip down. Keep your finger on the stand by button.it should boot up properly . Don't put it on stand by again, if you our do by mistake , do sa mm e again.
| Mon 19 Sep 2022 6:52:50 #6 |
Reply
You must log in to post.
