A message has appeared saying 'antennae has short circuited'. The picture is still very clear but the sound is now muffled and fuzzy. I have taken out the cable going into the antennae slot and restarted the machine but noise is still there. Is there anything I can do without buying a new machine!
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
antennae short circuit
(15 posts)-
| Sun 10 Jul 2011 17:41:29 #1 |
-
Go to Menu > Installation (password defaults to 0000) and set "Antenna Power" to off.
| Sun 10 Jul 2011 18:26:59 #2 | -
I have done this - but still the sound is fuzzy. Anything else I can do?
| Sun 10 Jul 2011 18:32:24 #3 | -
Welcome to the Forum
Check to see that the connection between the Humax and TV has not been disturbed, ie the Scart/HDMI leads are fully inserted.
| Sun 10 Jul 2011 19:02:05 #4 | -
Have done what you suggested - still the same. Even tried watching a previous recording from the hard drive - also voice fuzziness! Anything else I could do or do I have to buy a new unit - don't really want to!
| Sun 10 Jul 2011 21:40:31 #5 | -
what model of box do you have and how old is it?
| Sun 10 Jul 2011 23:11:45 #6 | -
It could well be the TV. How is the sound using the TV's tuner or a different digi box?
| Mon 11 Jul 2011 16:10:06 #7 | -
Humax model is PVR-9150T and it is just over 2 years old.
The TV is working fine - no fuzziness in picture or sound. Only when the box is turned on does the sound fuzziness happens. Picture is not affected.
| Mon 11 Jul 2011 19:39:01 #8 | -
Turn down the volume on the TV. Turn up the pvr volume using the pvr remote control to full. Now turn up the TV volume to a reasonable level. How is it now ?
| Mon 11 Jul 2011 20:03:40 #9 | -
Have just tried your suggestion - still no change - fuzzy sound even louder. I guess this means that I need to get a new box or get it fixed which ever is cheaper!!!!
| Mon 11 Jul 2011 20:42:13 #10 |
Reply »
You must log in to post.
