My Humax Forum » Freeview HD » FVP 4000T, 5000T

Auto / Man scan ?

(5 posts)
  1. User has not uploaded an avatar

    furkin

    senior member
    Joined: Aug '16
    Posts: 57

    offline

    There have been some new channels out & I want to rescan my machine.

    When I go to settings > channel settings, I only see the test signal option.

    Any idea where i'm going wrong please ?
    cheers

    | Sun 4 Jun 2017 22:30:12 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,051

    offline

    The retune option, amongst others, is only available if the unit is not recording, or playing back a recording.

    | Mon 5 Jun 2017 6:56:27 #2 |
  3. User has not uploaded an avatar

    furkin

    senior member
    Joined: Aug '16
    Posts: 57

    offline

    Thanks Barry,
    I may have been recording, but I forget whats happening. I set my recorder up for the week, so could well have been.
    I tried it a few times - including turning the machine off & on - to no avail.
    I tried again this morning, and all was well.

    thanks for your help
    Baz

    | Mon 5 Jun 2017 9:06:54 #3 |
  4. User has not uploaded an avatar

    AlMac99

    junior member
    Joined: Jan '19
    Posts: 5

    offline

    My thanks also. Thought we had a dreaded intermittent fault!

    | Sat 16 Jan 2021 19:23:51 #4 |
  5. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    furkin - 3 years ago  » 
    Thanks Barry,
    I may have been recording, but I forget whats happening. I set my recorder up for the week, so could well have been.
    I tried it a few times - including turning the machine off & on - to no avail.
    I tried again this morning, and all was well.
    thanks for your help

    Display the schedule. It should show what recordings are due shortly.

    | Sat 16 Jan 2021 20:01:30 #5 |

RSS feed for this topic

Reply

You must log in to post.