Software Version HPRSFc1.00.21
Loader Version U7.52 updated 27/7/2012
Ethernet ID 00-3-78-92-DC-C3
Checked router and DHCP is enabled
My Humax Forum » Freesat HD » FOXSAT HDR
Can't connect to iPlayer (ethernet)
(18 posts)-
| Mon 12 Nov 2012 16:13:58 #11 |
-
- Does it show an ip address?
- Is a green light showing om the ethernet port?| Mon 12 Nov 2012 16:17:18 #12 | -
IP address 192.168.1.4
Not sure if green light came on the back of box but think it did - removed ethernet cable this morning and cannot get to it now until tomorrow
Thanks
Mike| Mon 12 Nov 2012 16:23:01 #13 | -
Software is fine - if you have that IP address on the Foxsat then that is fine. What sort of router / isp service do you have?
| Mon 12 Nov 2012 16:34:19 #14 | -
Talk Talk DLink router with 4 ethernet connections (1 to my pc and 1 to the Humax when I reconnect) 15 - 18 Mb/s so line speed never a problem
After selecting 901 and pressing the red button to go to the test page, how long would you expect it to take to load?
| Mon 12 Nov 2012 16:40:54 #15 | -
With a direct cable connection and any multiple internet connection I would expect < 30 secs. My connection is much less optimal. Question - do all your other settings (and router) use automatic settings?
| Mon 12 Nov 2012 17:32:21 #16 | -
As far as I can tell yes - all auto Router LAN settings below and you can see it has picked up the Humax box
Will have another go with ethernet cable tomorrowDHCP Table
Host Name IP Address MAC Address StatusMike-PC 192.168.1.2 E0:DA:4E:D8:DC:D5 Auto
192.168.1.4 00:03:78:92:DC:C3 Auto| Mon 12 Nov 2012 19:34:49 #17 | -
All it seemed to need after all this work was a reboot - all now ok thanks guys
| Tue 13 Nov 2012 10:53:50 #18 |
Reply
You must log in to post.
