My Humax Forum » Freeview HD » FVP 4000T, 5000T

Connect FVP 5000T audio output to Hi Fi system.

(7 posts)
  1. User has not uploaded an avatar

    Mzungu

    junior member
    Joined: Dec '20
    Posts: 6

    offline

    I have a Humax FVP 5000T and would like to connect it to my HIFI, if possible, so I can have a better quality sound than listening through the TV speakers. I notice on the rear of the case are three RCA sockets, 2 of which are labelled audio L & R. I'm a bit wary of plugging into them to feed into my stereo amplifier as I'm not really sure about it. There is an input on the HIFI amp which I used to use with a DVD player recorder and obviously would like to do the same with my Humax.

    Can anyone who is knowledgable about these things please help or even suggest/recommend how I can do this.

    | Mon 18 Jan 2021 0:18:26 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,685

    offline

    Mzungu - 19 mins ago  » 
    Can anyone who is knowledgable about these things please help or even suggest/recommend how I can do this.

    Please could you tell us which make and model of HiFi you have?

    | Mon 18 Jan 2021 0:38:28 #2 |
  3. User has not uploaded an avatar

    SSThing

    special member
    Joined: Nov '15
    Posts: 1,306

    offline

    If it worked with your DVD it will work with the Humax.

    | Mon 18 Jan 2021 6:51:38 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    I can't get at my FVP-5000T at the moment. But from memory there is a menu setting you have to change to keep the analogue outputs on all the time otherwise it defaults to hdmi audio only.

    | Mon 18 Jan 2021 9:40:19 #4 |
  5. User has not uploaded an avatar

    Mzungu

    junior member
    Joined: Dec '20
    Posts: 6

    offline

    Martin Liddle - 10 hours ago  » 

    Mzungu - 19 mins ago  » 
    Can anyone who is knowledgable about these things please help or even suggest/recommend how I can do this.

    Please could you tell us which make and model of HiFi you have?

    The amplifier is an Arcam Alpha 6 and it has a video input which I used to plug the audio from the DVD player into.

    | Mon 18 Jan 2021 11:01:14 #5 |
  6. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Any pair of Red/White sockets should be fine. These might typically be labelled CD.

    Pres the FVP-Button. Move to settings (the cog) and press OK. Prees OK on general settings. Press OK on Audio. Change both S/Pdif and HDMI to Stereo

    From the user manual

    The CD and VIDEO inputs may also be used as
    general purpose inputs for sources with a
    suitable line level output - e.g. a second tape
    recorder.

    | Mon 18 Jan 2021 17:37:36 #6 |
  7. User has not uploaded an avatar

    Mzungu

    junior member
    Joined: Dec '20
    Posts: 6

    offline

    Thanks for everyones help and advice. I've tried it and it works fine.

    Thanks again.

    | Tue 19 Jan 2021 17:06:18 #7 |

RSS feed for this topic

Reply

You must log in to post.