When recording 2 or 3 channels while watching another I am getting video freezing while Audio is fine.
What might be causing this.
Also on some recordings I get noise bars / picture breakup on playback.
My Humax Forum » Freeview HD » FVP 4000T, 5000T
FVP 4000T video breakup / freezing
(9 posts)-
| Wed 8 Feb 2017 11:34:41 #1 |
-
Welcome to our Forum
Are you sure the unit is tuned to the correct, and only one transmitter?
| Wed 8 Feb 2017 11:56:37 #2 | -
I had break up/freezing this morning for a while sometime between 11 and 12. This was happening on BBC1 and BBC2 not on ITV. (All HD) it seems to have cleared now.
| Wed 8 Feb 2017 13:19:24 #3 | -
I suspect this is a transmission problem as I am suffering continuous picture stuttering on ITV HD and C4 HD, despite having (according to the signal test) 81% strength and 100% quality with NO indication of signal drop out at all.
I am on the Sutton Coldfield transmitter.| Wed 8 Feb 2017 14:17:22 #4 | -
SSThing - 5 minutes ago »
I suspect this is a transmission problem as I am suffering continuous picture stuttering on ITV HD and C4 HD, despite have (according to the signal test) 81% strength and 100% quality with NO indication of signal drop out at all.
I am on the Sutton Coldfield transmitter.I agree. I'ts just returned and I have the problems on the main 4 channels (HD) and I'm also on the Sutton Coldfield transmitter.
| Wed 8 Feb 2017 14:24:48 #5 | -
And now the Humax just rebooted itself.
| Wed 8 Feb 2017 14:35:20 #6 | -
Engineering work on Sutton this week according to:
http://www.digitaluk.co.uk/operations/planned_engineering_works
So maybe the cause..
| Wed 8 Feb 2017 15:57:48 #7 | -
I am on the Mendip transmitter.
If I watch a program via the FVP and have stuttering and switch the TV to direct view I have no stuttering so it would seem that it is not a transmission problem.| Sat 11 Feb 2017 9:22:58 #8 | -
My problems with the stuttering picture (Sutton Coldfield) seem to have cleared. I've had no instances of this problem for a couple of days now.
| Sat 11 Feb 2017 10:13:26 #9 |
Reply
You must log in to post.