My Humax Forum » Freeview HD » FVP 4000T, 5000T

FVP 5000T - No signal - Is this the end ?

(10 posts)
  1. User has not uploaded an avatar

    ReRo

    member
    Joined: Oct '19
    Posts: 11

    offline

    Humax FVP 5000T - 4¾ years old - Is this the end ?

    "The receiver is not receiving a signal or the signal is too weak"

    No pass thru (TV works direct from aerial but not through Humax).

    The Remote has become very sluggish (even for a Humax). Red light OK, New batteries have not helped.
    Looks OK in a camera - similar brightness to a working TV remote.

    Power brick looks OK - 12.2V when lighting a 21W car bulb.

    Player works OK and I can play back existing recordings.

    If I want the ability to record off air,
    what are my options?

    | Fri 7 Oct 2022 14:42:14 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,680

    offline

    ReRo - 2 hours ago  » 
    If I want the ability to record off air,
    what are my options?

    Have you tried a retune?

    | Fri 7 Oct 2022 16:52:18 #2 |
  3. User has not uploaded an avatar

    ReRo

    member
    Joined: Oct '19
    Posts: 11

    offline

    @ Martin Liddle
    No, I've not tried retuning - The Aerial signal is not getting into the PVR-5000T. RF pass thru is not working.

    | Sun 9 Oct 2022 21:31:10 #3 |
  4. User has not uploaded an avatar

    A1944

    special member
    Joined: Dec '17
    Posts: 1,000

    offline

    Have you tried switching off the power to the 5000T at the mains for a while and then switching it back on? Not just switching to standby with the remote.

    | Sun 9 Oct 2022 23:30:06 #4 |
  5. User has not uploaded an avatar

    ReRo

    member
    Joined: Oct '19
    Posts: 11

    offline

    @ A1944, Yes
    first thing i tried was to unplug for 5 minutes

    | Mon 10 Oct 2022 12:15:07 #5 |
  6. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,680

    offline

    ReRo - 15 hours ago  » 
    No, I've not tried retuning - The Aerial signal is not getting into the PVR-5000T. RF pass thru is not working.

    Signal not coming out isn't necessarily the same as signal not getting in. Do you have power saving mode turned off? Did this happen suddenly?

    | Mon 10 Oct 2022 13:20:18 #6 |
  7. User has not uploaded an avatar

    ReRo

    member
    Joined: Oct '19
    Posts: 11

    offline

    My error

    I moved the FVP-5000T after it became unresponsive to the Remote Control. The Aerial lead fell out and, when re-plugging, I mixed up the RF IN and RF OUT. I only noticed this after I'd lifted the FVP-5000T off its shelf and looked at the labels below the sockets on the back (a coax coupler had been fitted on the RF OUT socket).

    | Tue 11 Oct 2022 13:31:25 #7 |
  8. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,680

    offline

    ReRo - 1 hour ago  » 
    I moved the FVP-5000T after it became unresponsive to the Remote Control. The Aerial lead fell out and, when re-plugging, I mixed up the RF IN and RF OUT. I only noticed this after I'd lifted the FVP-5000T off its shelf and looked at the labels below the sockets on the back (a coax coupler had been fitted on the RF OUT socket).

    Thanks for coming back to us with an explanation. I think we have all made similar mistakes at one time or another and it is always good to understand the cause.

    | Tue 11 Oct 2022 14:51:01 #8 |
  9. User has not uploaded an avatar

    A1944

    special member
    Joined: Dec '17
    Posts: 1,000

    offline

    ReRo - 7 hours ago  » 
    My error
    I moved the FVP-5000T after it became unresponsive to the Remote Control. The Aerial lead fell out and, when re-plugging, I mixed up the RF IN and RF OUT. I only noticed this after I'd lifted the FVP-5000T off its shelf and looked at the labels below the sockets on the back (a coax coupler had been fitted on the RF OUT socket).

    So, that means that the problem is sorted I guess. If so, then excellent.

    | Tue 11 Oct 2022 20:34:42 #9 |
  10. User has not uploaded an avatar

    ReRo

    member
    Joined: Oct '19
    Posts: 11

    offline

    Yes, Thank you for your support and suggestions.

    Remote Control is back to normal.

    The original issue was a sudden loss of range and big slowdown of PVT-5000T. A change of batteries did not help - the remote had to be held against the IR window to get any response.

    Happily everything came back to normal after the RF lead was plugged into the correct socket.
    PVT-5000T is responding to the remote, even if pointing at the ceiling, sideways or even backwards

    I’ve noticed that youtube layout has been changed - it’s possible to get to the home button without having to click down through all the suggestions icons

    It was while watching youtube that I'd first noticed the problem . The screen has been changed – it takes only 3 clicks to get down to the home button at the bottom, instead of needing to go through all the suggestion icons.

    | Thu 13 Oct 2022 15:26:11 #10 |

RSS feed for this topic

Reply

You must log in to post.