is it possible to find out the size of the hard drive, we have two PVR-9150T units, and they were disconnected, now we don't know which is the I TB and which is the 500GB, any help would be greatly appreciated.
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
hard drive sizes
(10 posts)-
| Wed 15 Jan 2014 18:21:41 #1 |
-
Welcome to our Forum
Menu, Record, HDD Control should give you the info.
| Wed 15 Jan 2014 18:25:57 #2 | -
Thanks for replying, but that only shows what % is left free on the drive
| Wed 15 Jan 2014 18:39:52 #3 | -
Does it not list the amounts Free, Used, etc on the right hand side of the graphical representation of the HDD?
| Wed 15 Jan 2014 18:45:31 #4 | -
yes, 159.9 used and 30% free, so have I a 500gb drive or a 1TB drive, I just haven't the knowledge to work it out.
| Wed 15 Jan 2014 20:07:10 #5 | -
Not sat in front of a unit presently, so this is from memory.
Look to the right of that graphic, does it not state in GB how much is used, free, reserved etc, from that info it should be obvious which unit has what HDD I would have thought.
| Wed 15 Jan 2014 20:23:51 #7 | -
On the right hand side it has "Total"
A 320GB drive will have a "Total" of 314 GB
This means that ...
A 160GB drive will have a "Total" of about 157GB
A 250GB drive will have a "Total" of about 245GB
A 500GB drive will have a "Total" of about 491GB
A 1000GB drive will have a "Total" of about 982 GB| Wed 15 Jan 2014 21:07:45 #8 | -
Sorry that's for a 9200T.
The 9150T on software 1.00.26 the "Total" is the capacity give or take 0.3 GB.
| Wed 15 Jan 2014 21:16:52 #9 | -
Thank you for all you help, I had to find out as I have two units, one has developed a fault and I have been emailing Humax direct to try and get it resolved, if the unit has to be returned I need to know which one it is for the receipt and guarantee, Thanks again for help, its great to find helpful people like you all.
| Thu 16 Jan 2014 11:12:24 #10 |
Reply
You must log in to post.
