Hi has anyone else had the problem that Hdmi signal drops and can only be viewed by scart.
This seems to happen at least once a week, last time did a factory reset seems to be temporary fix
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
Hdmi signal lost
(5 posts)-
| Sat 30 Mar 2013 10:56:19 #1 |
-
No problem for me. It's usually a hdmi hdcp issue and very likely down to the TV (Make and Model of TV would help). It's worth checking if a software update for the TV is available.
Next time it happens try the following.
Select a different input on the TV and back to the HDR one.
In settings on the box change the output resolution and then back to the one you are using.
Either should force a new hdcp handshake.
Rather than a reset unplugging the power supply for 10 minutes or so may also resolve the problem.
| Sat 30 Mar 2013 11:31:12 #2 | -
Lg 42" plasma.
The box I have is around 5-6 weeks old. It hasn't been a issue before.
Tried different Hdmi channel was still the same . I think the humax is set to 1080i so ill try changing box settings
Thanks| Sat 30 Mar 2013 13:08:25 #3 | -
Try 1080p instead.
This works fine and has never caused any problems for me.
| Sat 30 Mar 2013 20:38:51 #4 | -
I've suffered this problem on 2 occasions (http://myhumax.org/forum/topic/hdmi-issue)
Having done my own tests, I believe that this is a problem with the Humax box, not the TV or HDMI handshake.
The quick fix is to factory default the box, the downside being that you will of course lose your planned recordings.
I am not aware of any more permanent solution.
| Tue 2 Apr 2013 13:54:09 #5 |
Reply
You must log in to post.
